Hot Drawing of Fiber Metal Composite Tubes

Mathematical Model of the Thermocompression Equipment Heating

CAD/CAM System for Metal Matrix Fiber Composite Tubes Production

Quantitative Modeling and Measurement of Copper Thin Film Adhesion

https://doi.org/10.1557/proc-539-277

Environmental Effects on Cu/SiO2 and Cu/Ti/SiO2 Thin Film Adhesion

Macroscopic Modeling of Fine Lines Adhesion Tests

https://doi.org/10.1557/proc-563-297

Acoustic Emission Analysis of Fracture Events in Cu Films with W Overlayer

https://doi.org/10.1557/proc-563-275

Nanoindentation-Induced Defect-Interface Interactions: Phenomena, Methods and Limitations

https://doi.org/10.1016/s1359-6454(99)00270-0

Superlayer Residual Stress Effect on the Indentation Adhesion Measurements

https://doi.org/10.1557/proc-594-383

Annealing Effects on Interfacial Fracture of Gold-Chromium Films in Hybrid Microcircuits https://doi.org/10.1557/proc-586-195

A Brittle to Ductile Transition (BDT) in Adhered Thin Films https://doi.org/10.1557/proc-594-351

Indentation-induced Debonding of Ductile Films https://doi.org/10.1557/proc-586-255

The Role of Plasticity in Bimaterial Fracture with Ductile Interlayers https://doi.org/10.1007/s11661-000-1006-1

The Role of Geometry and Plasticity in Thin, Ductile Film Adhesion

Adhesion Quantification of Post-CMP Copper to Amorphous SiN Passivation by Nanoindentation https://doi.org/10.1557/proc-649-q6.1

Microstructure and Mechanical Properties of Electroplated Cu Thin Films https://doi.org/10.1557/proc-649-q5.3

Finite Element Analysis of the Precracked Line Scratch Test https://doi.org/10.1557/proc-657-ee5.9

Effects of Diffusion on Interfacial Fracture of Multilayer Hybrid Microcircuit Films, N.R. Moody, D. P. Adams

Mechanical Properties, Adhesion, and Fracture Toughness of Low-K Dielectric Thin Films for Microelectronic Applications

Fiducial Marks as Measures of Thin Film Crack Arrest Toughness

https://doi.org/10.1016/s0013-7944(02)00003-6

Thin Film Adhesion by Nanoindentation-induced Superlayers. Final Report

https://doi.org/10.2172/809372

Substrate Effects on Indentation Plastic Zone Development in Thin Soft Films

https://doi.org/10.1557/jmr.2001.0434

Residual Stress and Microstructure of Electroplated Cu Film on Different Barrier Layers

https://doi.org/10.1557/proc-695-l1.11.1

Effects of Interface Structure on Gold Film Adhesion

Nanoindentation of Silicate Low-K Dielectric Thin Films

https://doi.org/10.1557/proc-716-b12.13

Crack Arrest Toughness Assessment Through Thin Film Fiducial Marks

Interfacial Toughness Measurements for Thin Films on Substrates

https://doi.org/10.1016/s1359-6454(01)00354-8

Fiducial Mark and Nanocrack Zone Formation During Thin Film Delamination

https://doi.org/10.1080/01418610208240449

Fracture Toughness, Adhesion and Mechanical Properties of Low-K Dielectric Thin Films Measured by Nanoindentation

https://doi.org/10.1016/s0040-6090(03)00406-1

Experiments with In-situ Thin Film Phone Cord Delamination Propagation

Incompressible Pore Effect on the Mechanical Behavior of Low-K Dielectric Films https://doi.org/10.1557/proc-750-y9.9

Plasticity Effects on Interfacial Fracture of Thin Gold Films

Mechanical Reliability and Characterization of Modern Microelectronic Interconnect Structures

Characterization Techniques for Evaluating Strained Si CMOS Materials https://doi.org/10.1063/1.1622475

Optical and Dielectric Properties of Eu- and Y-Polytantalate Thin Films https://doi.org/10.1557/proc-786-e3.31

Oxide Reduction in Advanced Metal Stacks for Microelectronic Applications https://doi.org/10.1557/proc-786-e6.33

Application of FIB/SEM and TEM to Single Bit Failure Analysis in SRAM arrays https://doi.org/10.1557/proc-782-a5.77

Fracture Patterns in Thin Films and Multilayers https://doi.org/10.1557/proc-795-u3.8

Irradiated Cubic Single Crystal SiC as a High Temperature Sensor https://doi.org/10.1557/proc-792-r5.3

Fiducial Mark and CTOA Estimates of Thin Film Adhesion

https://doi.org/10.1023/a:1024983930481

Length Scales for the Fracture of Nanostructures

https://doi.org/10.1023/a:1024927812734

Mechanical Properties and Fracture Toughness of Organosilicate Glass (OSG) Lowk Dielectric Thin Films for Microelectronic Application

https://doi.org/10.1023/a:1024944316369

Effects of Diffusion on Interfacial Fracture of Goldchromium Hybrid Microcircuit Film

https://doi.org/10.1023/a:1024979829573

Nanoindentation Techniques for Assessing Mechanical Reliability at Nanoscale

https://doi.org/10.1016/s0167-9317(03)00341-1

Microelectronic Engineering

Nanoindentation Methods in Interfacial Fracture Testing, Chapter 13 in Comprehensive Structural Integrity

Irradiated Single Crystals for High Temperature Measurements in Space Applications

https://doi.org/10.1557/proc-851-nn1.4

Sub-Critical Telephone Cord Delamination Propagation and Adhesion Measurements

https://doi.org/10.1557/proc-854-u9.5

Microfluidics Applications of Telephone Cord Delamination Blisters

https://doi.org/10.1557/proc-855-w3.16

Effects of Neartip Rotation on Prebuckle Crack Growth of Compressed Beams Bonded to a Rigid Substrate

https://doi.org/10.1016/j.ijsolstr.2003.10.002

Nanoindentation of Au and Pt/Cu Thin Films at Elevated Temperatures

https://doi.org/10.1557/jmr.2004.0331

Tensile Crack Patterns in Mo/Si Multilayers on Si Substrates Under Hightemperature Bending

https://doi.org/10.1007/s00339-003-2340-0

Foreword: Microelectronic Engineering Special Issue: Characterization and Mechanical Reliability of Advanced Electronic Materials at Nanoscale

FIB Failure Analysis of Memory Arrays

https://doi.org/10.1016/s0167-9317(04)00305-3

Gate Oxide Metrology and Silicon Piezooptics

https://doi.org/10.1016/j.tsf.2003.11.276

Nanotechnology Toolkit

Stress-Induced Periodic Fracture Patterns in Thin Films

Moisture Effects on Copper Thin Film Adhesion

https://doi.org/10.1115/imece2005-81532

Mechanical Aspects of Anti-Corrosive Coatings Performance Tests

https://doi.org/10.21236/ada456129

Novel Adhesion Test for Environmentally Assisted Fracture in Thin Films

https://doi.org/10.21236/ada456175

Spontaneous Oxide Reduction in Metal Stacks

https://doi.org/10.1016/j.tsf.2004.07.066

Application of the Standard Porosimetry Method for Nanomaterials

https://doi.org/10.1504/ijnt.2005.008066

Materials, Technology and Reliability of Low-k Dielectrics and Copper Interconnects

Nanoripples Formation in Single Crystals

Stress and Moisture Effects on Thin Film Buckling Delamination

https://doi.org/10.1007/s11340-006-9346-4

Interfacial Microstructure of Chromium Oxide Coatings

https://doi.org/10.1002/adem.200700057

Microstructure and Mechanical Properties of Chromium Oxide Coatings

https://doi.org/10.1557/jmr.2007.0445

Thin Films for Microelectronics and Photonics: Physics, Mechanics, Characterization, and Reliability

https://doi.org/10.1007/0-387-32989-7_4

Compliant MEMS Motion Characterization by Nanoindentation

https://doi.org/10.1557/proc-1052-dd06-24

Electrowetting Forces in an Electrowetting-Driven Oscillator

Mechanical Properties of Single and Polycrystalline SiC Thin Films, J. Deva Reddy

Pattern Formation During Nanowear of Gold Films https://doi.org/10.1557/proc-1059-kk10-03

Tip-induced Calcite Single Crystal Nanowear https://doi.org/10.1557/proc-1049-aa05-15

Adhesion and Friction of Chromium Oxide Coatings in Air and in Water

Moisture Effects on Gold Nanowear https://doi.org/10.1557/proc-1085-t05-10

Residual Stress in CVD-grown 3C-SiC Films on Si Substrates https://doi.org/10.1557/proc-1069-d03-05

Mechanical Properties of Evaporated Gold Films. Hard Substrate Effect Correction https://doi.org/10.1557/proc-1086-u08-41

Elastic Anisotropy Effect on Indentationinduced Thin Film Interfacial Delamination https://doi.org/10.1016/j.engfracmech.2007.12.008

Annealing Effects on Microstructure and Mechanical Properties of Chromium Oxide Coatings. https://doi.org/10.1016/j.tsf.2007.08.083

Giant Magnetoelectric Effect in Ni-PZT Composite Cylindrical Structure

Shape and Size Effects on Layered Ni/PZT/Ni Composites Magnetoelectric Performance. https://doi.org/10.1088/0022-3727/41/17/172003

Concentric Ring Pattern Formation in Heated Chromiumgold Thin Films on Silicon. https://doi.org/10.1063/1.2937309

Electrodeposition Current Density Effect on Ni/PZT Layered Magnetoelectric Composites Performance. https://doi.org/10.1088/0022-3727/41/19/195004

Simple Model of the Magnetoelectric Effect in Layered Cylindrical Composites. https://doi.org/10.1088/0022-3727/41/20/205008

Compliant MEMS Device Actuation and Fracture

Investigation of Microstructure and Mechanical Properties of Multilayer Cr/Cr2O3 Coatings. https://doi.org/10.1016/j.tsf.2008.10.026

Geometry Effects on Magnetoelectric Performance of Layered Ni/PZT Composites. https://doi.org/10.1016/j.mseb.2009.05.017

3C-SiC Films on Si for MEMS Applications: Mechanical Properties, C. Locke, G. Kravchenko, P. Waters, J. Deva Reddy

Measurements for Mechanical Reliability of Thin Films

https://doi.org/10.1007/978-90-481-2792-4_16

MEMS Slider Friction Characterization

Demonstration of Continuous Electrowetting Actuation

https://doi.org/10.1115/imece2010-40060

Heat Treatment Effects on Microstructure and Magnetic Properties of Mn-Zn Ferrite Powders

https://doi.org/10.1016/j.jmmm.2009.09.002

Resonant Modes and Magnetoelectric Performance of PZT/Ni Cylindrical Layered Composites

https://doi.org/10.1007/s00339-009-5419-4

Application of the Inverse Wavelet Transform on Electrochemical Current Signals to Demonstrate the Essence of High-frequency Variations

https://doi.org/10.1108/00035591011028023

Characterization of Electrowetting Processes Through Force Measurements

https://doi.org/10.1063/1.3373945

Bidirectional Electrowetting Actuation with Voltage Polarity Dependence

https://doi.org/10.1063/1.3353990

Current-Voltage Characteristics of Lead Zirconate Titanate/Nickel Bilayered Hollow Cylindrical Magnetoelectric Composites, D.A. Pan.

https://doi.org/10.1088/1674-1056/19/2/027201

Inductancecapacitance Resonance Effect in the Magnetoelectric Composites Characterization System

https://doi.org/10.1007/s00339-010-5740-y

Carbothermal Reduction Method for Fe3O4 Powder Synthesis

https://doi.org/10.1016/j.jallcom.2010.03.001

Growth Rate Effect on 3C-SiC Film Residual Stress on (100) Si Substrates

https://doi.org/10.4028/www.scientific.net/msf.645-648.143

Nanomechanical Properties of TiO2 Granular Thin Films

https://doi.org/10.1021/am100455q

Fracture of Colloidal Single Crystal Films Fabricated by Controlled Vertical Drying Deposition

https://doi.org/10.1103/physreve.82.031602

Microstructure and Mechanical Properties of Ti/AlTiN/Ti-Diamondlike Carbon Composite Coatings on Steel

https://doi.org/10.1557/jmr.2010.0281

FE Practice Test with Complete Solutions. General Engineering

Fuel Additives and Heat Treatment Effects on Nanocrystalline Zinc Ferrite Phase Composition

https://doi.org/10.1016/j.jmmm.2010.10.013

Theoretical Explanation of Ag/Cu and Cu/Ni Nanoscale Multilayers Softening

https://doi.org/10.1016/j.matlet.2010.09.063

Epoxy Resin Effect on Anisotropic Nd–Fe–B Rubber-bonded Magnets Performance

https://doi.org/10.1016/j.jallcom.2010.09.210

Heat Treatment Effects on Fe3O4 Nanoparticles Structure and Magnetic Properties Prepared by Carbothermal Reduction

https://doi.org/10.1016/j.jallcom.2010.10.211

Mn-Zn Soft Magnetic Ferrite Nanoparticles Synthesized from Spent Alkaline Zn-Mn Batteries | https://doi.org/10.1016/j.jallcom.2010.12.204

Humidity Effects on (001) BaTiO3 Single Crystal Surface Water Adsorption | https://doi.org/10.1063/1.3544586

Local Piezoelectric Effect on Single Crystal ZnO Microbelt Transverse I-V Characteristics | https://doi.org/10.1063/1.3555456

Thermoporometry Study of Coagulation Bath Temperature Effect on Polyacrylonitrile Fibers Morphology | https://doi.org/10.1016/j.tca.2011.02.015

AlTiN Layer Effect on Mechanical Properties of Tidoped Diamondlike Carbon Composite Coatings | https://doi.org/10.1016/j.tsf.2011.02.040

Annealing Effects on Microstructure and Mechanical Properties of Sputtered Multilayer Cr(1-x)AlxN Films | https://doi.org/10.1016/j.tsf.2011.02.063

Fe3O4 Magnetic Nanoparticles Synthesis from Tailings by Ultrasonic Chemical Coprecipitation | https://doi.org/10.1016/j.matlet.2011.03.065

Microstructure and Hardness of Laser Shocked Ultrafinegrained Aluminum | https://doi.org/10.1016/s1005-0302(11)60144-8

Microstructure and Quality of SiC Foam Filters for Casting

Hydrogen Effects on Stainless Steel Passive Film Fracture Studied by Nanoindentation | https://doi.org/10.1016/j.corsci.2011.05.025

Room Temperature Ferromagnetism in Sputtered Zn1–xCrxO Thin Films

https://doi.org/10.1016/j.matlet.2011.05.074

Electric Field and Surface Charge Effects on Ferroelectric Domain Dynamics in BaTiO3 Single Crystal

https://doi.org/10.1103/PhysRevB.84.024101

Insitu Transmission Electron Microscopy Study of Alphabrass Nanoligament Formation, Microstructure Evolution and Fracture

https://doi.org/10.1016/j.scriptamat.2011.05.032

Water Preadsorption Effect on Room Temperature SnO2 Nanobelt Ethanol Sensitivity in Oxygendeficient Conditions

https://doi.org/10.1016/j.snb.2011.06.031

Isothermal and Thermal Cycling Oxidation of Hotdip Aluminide Coating on Flake/Spheroidal Graphite Cast Iron

https://doi.org/10.1016/j.surfcoat.2011.06.010

High Temperature Oxidation Behavior of Flake and Spheroidal Graphite Cast Irons

https://doi.org/10.1007/s11085-011-9244-8

Discontinuous Surface Cracks During Stress Corrosion Cracking of Stainless Steel Single Crystal

https://doi.org/10.1016/j.corsci.2011.06.019

Humidity Effect on BaTiO3 cdomain Surface Potential Inversion Induced by Electric Field

https://doi.org/10.1063/1.3636396

Annealing Effects on Magnetic Properties of Siliconecoated Ironbased Soft Magnetic Composites

https://doi.org/10.1016/j.jmmm.2011.09.026

Microstructure of Ultrafinegrained High Carbon Steel Prepared by Equal Channel Angular Pressing

https://doi.org/10.1016/j.msea.2011.12.091

Nanostructured Ion Beammodified Ge Films for High Capacity Li Ion Battery Anodes

https://doi.org/10.1063/1.3689781

The Role of Trivalent Arsenic in Removal of Antimony and Bismuth Impurities from Copper Electrolytes

https://doi.org/10.1016/j.hydromet.2012.05.011

Failure Analysis of the Oil Transport Spiral Welded Pipe

https://doi.org/10.1016/j.engfailanal.2012.05.008

Nd2Fe17 Nanograins Effect on the Coercivity of HDDR NdFeB Magnets with Low Boron Content

https://doi.org/10.1007/s12613-012-0544-z

Ironbased Soft Magnetic Composites with Mn-Zn Ferrite Nanoparticles Coating Obtained by Solgel Method

https://doi.org/10.1016/j.jmmm.2012.06.042

Antitumor Activity of Selfcharged (Eu, Ca):WO3, Eu:CaWO4 Nanoparticles

https://doi.org/10.1007/s12034-012-0374-7

Rapid Annealing Effects on Microstructure, Texture, and Magnetic Properties of Nonoriented Electrical Steel

https://doi.org/10.1007/s12540-012-3024-0

Preparation and Characterization of Leadfree Piezoelectric Ceramics

https://doi.org/10.4028/www.scientific.net/kem.492.189

Slag Material's Proportion Optimised by Polynomial Regression

Stress Evaluation on Heteroepitaxial 3C-SiC Film on (100) Si Substrates

https://doi.org/10.4028/www.scientific.net/msf.717-720.521

Development Stages of the 'Rope' Human Intestinal Parasite

Human Anaerobic Intestinal 'Rope' Parasites

Ion Beammixed Ge Electrodes for High Capacity Li Rechargeable Batteries

https://doi.org/10.1016/j.jpowsour.2012.09.056

Mechanical Properties and Fracture Characteristics of High Carbon Steel after Equal Channel Angular Pressing

https://doi.org/10.1016/j.msea.2012.11.068

Stress Nature Investigation on Heteroepitaxial 3C-SiC Film on (100) Si Substrates

https://doi.org/10.1557/jmr.2012.224

Effects of Laser Shock Processing on Surface Microstructure and Mechanical Properties of Ultrafinegrained High Carbon Steel

https://doi.org/10.1016/j.msea.2013.01.068

Microstructure, Residual Stress and Fracture of Sputtered TiN Films

https://doi.org/10.1016/j.surfcoat.2013.03.009

Fast Deposition of Diamondlike Carbon Films by Radio Frequency Hollow Cathode Method

https://doi.org/10.1016/j.tsf.2013.02.123

Bonded Composite Repair Structures Multiple Site Damage Analysis

https://doi.org/10.1108/00022661311313560

Microstructure Evolution of Al-12Si-CuNiMg Alloy Under High Temperature Low Cycle Fatigue

https://doi.org/10.1016/j.msea.2013.03.027

Floating Electrode Electrowetting on Hydrophobic Dielectric with an SiO2 Layer

https://doi.org/10.1063/1.4807018

Environmentallyfriendly Organochlorine Waste Processing and Recycling

https://doi.org/10.1016/j.jclepro.2013.05.010

Fracture Toughness and Adhesion of Transparent Al:ZnO Films Deposited on Glass Substrates

https://doi.org/10.1007/s11665-013-0603-2

Recycle of Valuable Products from Oily Cold Rolling Mill Sludge

https://doi.org/10.1007/s12613-013-0818-0

MgH2 Dehydrogenation Properties Improved by MnFe2O4 Nanoparticles

https://doi.org/10.1016/j.jpowsour.2013.03.096

Microstructure Effect on Hydrogeninduced Cracking in TM210 Maraging Steel

https://doi.org/10.1016/j.msea.2013.07.097

Stainless Steel Pitting and Earlystage Stress Corrosion Cracking Under Ultralow Elastic Load

https://doi.org/10.1016/j.corsci.2013.08.028

Analysis of the Tubesheet Cracking in Slurry Oil Steam Generators

https://doi.org/10.1016/j.engfailanal.2013.08.007

Electromechanical Coupling of Stainless Steel Oxidation Film

Dehydrogenation Improvement of LiAlH4 Catalyzed by Fe2O3 and Co2O3 Nanoparticles

Ferrite and Austenite Phase Identification in Duplex Stainless Steel Using SPM Techniques

https://doi.org/10.1016/j.apsusc.2013.09.041

Additive Effects on Tin Electrodepositing in Acid Sulfate Electrolytes

https://doi.org/10.1007/s12613-013-0753-0

Cyanidefree Silver Electroplating Process in Thiosulfate Bath and Microstructure Analysis of Ag Coatings

https://doi.org/10.1016/s1003-6326(13)62935-0

NiFe2O4 Nanoparticles Catalytic Effects of Improving LiAlH4 Dehydrogenation Properties

Improved Hydrogen Storage Performance of MgH2-LiAlH4 Composite by Addition of MnFe2O4

NbCl5 and CrCl3 Catalysts Effects on Synthesis and Hydrogen Storage Performance of Mg-Ni-NiO Composites

https://doi.org/10.1007/s12034-014-0631-z

Delaminated Film Buckling Microchannels

https://doi.org/10.1007/978-1-4614-4562-3_8

Recoating Slurry Process Effects on the SiCbased Casting Foam Filter Properties

NaAlH4 Dehydrogenation Properties Enhanced by MnFe2O4 Nanoparticles

https://doi.org/10.1016/j.jpowsour.2013.09.093

Numerical Calculation of the Electron Density at the Wigner-Seitz Radius Based on the TFD Equation

Adhesion of Sputtered Nickel Films on Polycarbonate Substrates

DOI: https://doi.org/10.1007/s11665-013-0806-6

Temperature, Moisture and Modemixity Effects on Copper Leadframe/EMC Interfacial Fracture Toughness

DOI: https://doi.org/10.1007/s10704-013-9907-3

Passive Filminduced Stress and Mechanical Properties of α-Ti in Methanol Solution

DOI: https://doi.org/10.1016/j.corsci.2013.10.011

Corrosion Resistance and Friction of Sintered NdFeB Coated with Ti/TiN Multilayers

DOI: https://doi.org/10.1016/j.tsf.2013.10.133

Stress Corrosion Cracking Under Low Stress: Continuous or Discontinuous Cracks?

DOI: https://doi.org/10.1016/j.corsci.2013.11.057

Multiplied Magnetoelectric Effect in Multifaceted Magnetoelectric Composite

DOI: https://doi.org/10.1063/1.4863056

Oxidation and Decarburization of Highcarbonchromium Steel Under Charcoal Protection During Spheroidizing

DOI: https://doi.org/10.1179/1749514814z.000000000103

La Doping Effect on TZM Alloy Oxidation Behavior

DOI: https://doi.org/10.1016/j.jallcom.2013.12.270

TiN Coating Effects on Stainless Steel Tribological Behavior Under Dry and Lubricated Conditions

DOI: https://doi.org/10.1007/s11665-014-0904-0

Water Molecules Effect on Pure Ti Passive Film Structure in Methanol Solution

DOI: https://doi.org/10.1016/j.apsusc.2014.02.167

CO Impurities Effect on LaNi4.7Al0.3 Hydrogen Storage Alloy Hydrogenation/dehydrogenation Properties

DOI: https://doi.org/10.1007/s12034-014-0014-5

Rare Earth Elements Recycling from Waste Phosphor by Dual Hydrochloric Acid Dissolution

DOI: https://doi.org/10.1016/j.jhazmat.2014.02.043

Wide Magnetic Field Range of Ni-P/PZT/Ni-P Cylindrical Layered Magnetoelectric Composites

DOI: https://doi.org/10.1063/1.4868415

Experimental Investigation of the Cutting Force Measurements in Machinability Evaluations of Metals

DOI: https://doi.org/10.1520/jte20130169

Temperature Change Effect on BaTiO3 Single Crystal Surface Potential Around Domain Walls

DOI: https://doi.org/10.1016/j.apsusc.2014.05.175

Duplex Stainless Steel Passive Film Electrical Properties Studied by In Situ Current Sensing Atomic Force Microscopy

DOI: https://doi.org/10.1016/j.corsci.2013.08.031

Tungsten Carbide Synthesized by Lowtemperature Combustion as Gas Diffusion Electrode Catalyst

DOI: https://doi.org/10.1016/j.ijhydene.2014.04.173

Crosslinking Effect on Polydimethylsiloxane Elastic Modulus Measured by Custom-Built Compression Instrument

DOI: https://doi.org/10.1002/app.41050

Changes of Work Function in Different Deformation Stage for 2205 Duplex Stainless Steel by SKPFM

DOI: https://doi.org/10.1016/j.mspro.2014.06.280

Effects of Hydrogen and Chloride Ions on Automobile Interstitial-Free Steel Corrosion

DOI: https://doi.org/10.5006/1126

Study of the Hydrogeninduced Amorphization in the LaNi2.28 Alloy

DOI: https://doi.org/10.1039/c4ra02302a

Effects of Quenching and Tempering on the Microstructure and Bake Hardening Behavior of Ferrite and Dual Phase Steels

DOI: https://doi.org/10.1016/j.msea.2014.06.100

Significantly Improved Dehydrogenation of Ballmilled MgH2 Doped with CoFe2O4 Nanoparticles

DOI: https://doi.org/10.1016/j.jpowsour.2014.06.116

AlN Powder Synthesis by Sodium Fluorideassisted Carbothermal Combustion

DOI: https://doi.org/10.1016/j.ceramint.2014.07.014

Facile Route for Synthesis of Mesoporous Cr2O3 Sheet as Anode Materials for Liion Batteries

DOI: https://doi.org/10.1016/j.electacta.2014.06.160

Phosphorus Content Effect on the Magnetoelectric Properties of the Ni-P(Ni)/PZT/Ni-P(Ni) Cylindrical Layered Composites

DOI: https://doi.org/10.1016/j.matlet.2014.07.047

Improved Magnetoelectric Performance of the Ni-P/Ni/Pb(Zr, TiO)3 Cylindrical Layered Composites

DOI: https://doi.org/10.1063/1.4895065

Electric Field and Humidity Effects on Adsorbed Water Behavior on BaTiO3 Ferroelectric Domains Studied by SPM

Additional Magnetoelectric Effect in Electrodearrayed Magnetoelectric Composite

DOI: https://doi.org/10.1063/1.4901564

Failure Analysis of Differential Pressure Transmitter Impulse Pipe in High Sulfur Purification Device

DOI: https://doi.org/10.4028/www.scientific.net/amm.668-669.102

Preparation of BaPbO3 Functional Ceramics from Leaded Waste

DOI: https://doi.org/10.1007/s12598-014-0369-1

Nanoindentation Study of Polydimethylsiloxane Elastic Modulus Using Berkovich and Flat Punch Tips

DOI: https://doi.org/10.1002/app.41384

One Pot Solution Combustion Synthesis of Highly Mesoporous Hematite for Photocatalysis

DOI: https://doi.org/10.1016/j.ceramint.2014.10.100

Thickness Effect on the Band Gap of Magnetron Sputtered Pb45Se45O10 Thin Films on Si

DOI: https://doi.org/10.1016/j.physe.2014.11.021

Complete Recovery of Eu from BaMgAl10O17:Eu2+ by Alkaline Fusion and its Mechanism

Microstructure and Mechanical Properties of Granular Pearlite Steel After Equal Channel Angular Pressing

DOI: https://doi.org/10.1007/s11665-015-1553-7

Microstructure Evolution and Microhardness of Ultrafinegrained High Carbon Steel During Multiple Laser Shock Processing, Yi Xiong

DOI: https://doi.org/10.1016/s1006-706x(15)60009-7

Multielectrode Pb(Zr, TiO)3/Ni Cylindrical Layered Magnetoelectric Composite

DOI: https://doi.org/10.1063/1.4906614

Mechanism of CeMgAl11O19:Tb3+ Alkaline Fusion with Sodium Hydroxide

Bonded Cylindrical Terfenol-D-Epoxy/PZT Magnetoelectric Composites Prepared by the Onestep Compression Molding

DOI: https://doi.org/10.1063/1.4914106

Preparation of Cu-Al2O3 Bulk Nanocomposites by Combining Cu-Al Alloy Sheets Internal Oxidation with Hot Extrusion

DOI: https://doi.org/10.1016/j.jallcom.2015.02.057

Study of Gamification Effectiveness in Online e-Learning Systems

DOI: https://doi.org/10.14569/ijacsa.2015.060211

Production of Glassceramics from Heavy Metal Gypsum and Pickling Sludge

DOI: https://doi.org/10.1007/s13762-015-0758-5

Residual Stress and Surface Energy of Sputtered TiN Films

DOI: https://doi.org/10.1007/s11665-015-1393-5

La2O3 Effects on TZM Alloy Recovery, Recrystallization and Mechanical Properties, K.-S. Wang, J.-F. Tan

CoCrMo Alloy for Orthopedic Implant Application Enhanced Corrosion and Tribocorrosion Properties by Nitrogen Ion Implantation

DOI: https://doi.org/10.1016/j.apsusc.2015.04.054

Microstructure and Microhardness of Pearlitic Steel After Laser Shock Processing and Annealing

DOI: https://doi.org/10.1179/1743284715y.0000000020

Preparation and Ductiletobrittle Transition Temperature of the La-TZM Alloy Plates, P. Hu, F. Yang, K.-S. Wang

Participant Behavior and Content of the Online Foreign Languages Learning and Teaching Platform

DOI: https://doi.org/10.1016/j.chb.2015.04.028

Gamification, Virality and Retention in Educational Online Platform

DOI: https://doi.org/10.14569/ijacsa.2015.060402

Antimony Recovery from SbCl5 Acid Solution by Hydrolysis and Aging

DOI: https://doi.org/10.1007/s12598-015-0480-y

Mechanism and Kinetics of the BaMgAl10O17:Eu2+ Alkaline Fusion Reaction

DOI: https://doi.org/10.1016/s1002-0721(14)60468-3

Free Oxoanion Theory for BaMgAl10O17:Eu2+ Structure Decomposition During Alkaline Fusion Process

Comparison of the Macroscale and Microscale Tests for Measuring Elastic Properties of Polydimethylsiloxane

DOI: https://doi.org/10.1002/app.42680

Amorphous Carbon Modified Nanosized Tungsten Carbide as Gas Diffusion Electrode Catalyst for Oxygen Reduction Reaction

DOI: https://doi.org/10.1039/c5ra15394h

Brittle Filminduced Cracking of Ductile Substrates

DOI: https://doi.org/10.1016/j.actamat.2015.07.059

Aluminum Powder Size and Microstructure Effects on Properties of Boron Nitride Reinforced Aluminum Matrix Composites Fabricated by Semisolid Powder Metallurgy

DOI: https://doi.org/10.1016/j.msea.2015.08.081

Stress Corrosion Cracking at Low Loads: Surface Slip and Crystallographic Analysis

DOI: https://doi.org/10.1016/j.corsci.2015.08.040

Paper: "Effects of Ce Addition on High Temperature Deformation Behavior of Cu-Cr-Zr Alloys"

DOI: https://doi.org/10.1007/s11665-015-1693-9

This episode is part of a series exploring all 556 publications of Professor Alex Volinsky. Voices in this episode are AI-generated (Elena and Marcus).

Paper: "Deformation Behavior and Microstructure Evolution of the Cu-2Ni-0.5Si-0.15Ag Alloy During Hot Compression"

DOI: https://doi.org/10.1007/s11661-015-3150-7

This episode is part of a series exploring all 556 publications of Professor Alex Volinsky. Voices in this episode are AI-generated (Elena and Marcus).

Paper: "Electrochemical Oxidation of Methanol on Pt-SnOx/C Catalysts Characterized by Electrochemistry Methods"

DOI: https://doi.org/10.1149/2.0921514jes

This episode is part of a series exploring all 556 publications of Professor Alex Volinsky. Voices in this episode are AI-generated (Elena and Marcus).

Paper: "Study on the Growth Mechanism and Optical Properties of Sputtered Lead Selenide Thin Films"

DOI: https://doi.org/10.1016/j.apsusc.2015.08.195

This episode is part of a series exploring all 556 publications of Professor Alex Volinsky. Voices in this episode are AI-generated (Elena and Marcus).

Paper: "Structure and Composition Effects on Electrical and Optical Properties of Sputtered PbSe Thin Films"

DOI: https://doi.org/10.1016/j.tsf.2015.09.009

This episode is part of a series exploring all 556 publications of Professor Alex Volinsky. Voices in this episode are AI-generated (Elena and Marcus).

This episode covers the paper: "Challenges in Legislation, Recycling System and Technical System of Waste Electrical and Electronic Equipment in China". DOI: https://doi.org/10.1016/j.wasman.2015.05.015. Part of the series featuring Professor Alex Volinsky's 556 publications. Voices are AI-generated (Elena and Marcus).

This episode covers the paper: "Study of Monetization as a Way of Motivating Freemium Service Users". DOI: https://doi.org/10.12988/ces.2015.57212. Part of the series featuring Professor Alex Volinsky's 556 publications. Voices are AI-generated (Elena and Marcus).

This episode covers the paper: "Cryorolling Effect on Microstructure and Mechanical Properties of Fe-25Cr-20Ni Austenitic Stainless Steel". DOI: https://doi.org/10.1016/j.matdes.2015.09.029. Part of the series featuring Professor Alex Volinsky's 556 publications. Voices are AI-generated (Elena and Marcus).

This episode covers the paper: "Superior Destabilization Effects of LiBH4 with the Addition of Nanosized Nickel Ferrite NiFe2O4". Part of the series featuring Professor Alex Volinsky's 556 publications. Voices are AI-generated (Elena and Marcus).

This episode covers the paper: "Thickness Effects on Optical and Photoelectric Properties of PbSeTeO Quaternary Thin Films Prepared by Magnetron Sputtering". DOI: https://doi.org/10.1007/s10854-015-3438-9. Part of the series featuring Professor Alex Volinsky's 556 publications. Voices are AI-generated (Elena and Marcus).

Based on the paper "Obtaining Full Contact for Measuring Polydimethylsiloxane Mechanical Properties with Flat Punch Nanoindentation, F. De Paoli". DOI: https://doi.org/10.1016/j.mex.2015.09.004

This episode is part of the 556-publications series, covering all 556 of Professor Alex Volinsky's research publications.

Voices: Elena and Marcus (AI-generated).

Based on the paper "Surface Effects on Static Bending of Nanowires Based on Nonlocal Elasticity Theory". DOI: https://doi.org/10.1016/j.pnsc.2015.09.012

This episode is part of the 556-publications series, covering all 556 of Professor Alex Volinsky's research publications.

Voices: Elena and Marcus (AI-generated).

Based on the paper "Spheroidization of Molybdenum Powder by Radio Frequency Thermal Plasma". DOI: https://doi.org/10.1007/s12613-015-1187-7

This episode is part of the 556-publications series, covering all 556 of Professor Alex Volinsky's research publications.

Voices: Elena and Marcus (AI-generated).

Based on the paper "Effects of Laser Pulse Energy on Surface Microstructure and Mechanical Properties of High Carbon Steel". DOI: https://doi.org/10.1007/s11771-015-3000-1

This episode is part of the 556-publications series, covering all 556 of Professor Alex Volinsky's research publications.

Voices: Elena and Marcus (AI-generated).

Based on the paper "Effect of TiO2 on Crystallization, Microstructure and Mechanical Properties of Glassceramics". DOI: https://doi.org/10.1016/s1006-706x(15)30120-5

This episode is part of the 556-publications series, covering all 556 of Professor Alex Volinsky's research publications.

Voices: Elena and Marcus (AI-generated).

Based on the paper "Defects Evolution in Nanoporous Au(Pt) During Dealloying". DOI: https://doi.org/10.1016/j.scriptamat.2015.10.006

This episode is part of the 556-publications series, covering all 556 of Professor Alex Volinsky's research publications.

Voices: Elena and Marcus (AI-generated).

Based on the paper "Directional Magnetoelectric Effect in Multielectrode Pb(Zr, Ti)O3/Ni Cylindrical Layered Composite". DOI: https://doi.org/10.1016/j.matdes.2015.09.156

This episode is part of the 556-publications series, covering all 556 of Professor Alex Volinsky's research publications.

Voices: Elena and Marcus (AI-generated).

Based on the paper "Aging Behavior and Precipitates Analysis of the Cu-Cr-Zr-Ce Alloy". DOI: https://doi.org/10.1016/j.msea.2015.10.046

This episode is part of the 556-publications series, covering all 556 of Professor Alex Volinsky's research publications.

Voices: Elena and Marcus (AI-generated).

Based on the paper "Polyvinyl Chloride Film Local Isometric Heat Treatment for Hidden 3D Printing on Polymer Packaging". DOI: https://doi.org/10.1002/app.43046

This episode is part of the 556-publications series, covering all 556 of Professor Alex Volinsky's research publications.

Voices: Elena and Marcus (AI-generated).

Based on the paper "Enhanced Magnetoelectric Efficiency of the Tb1-xDyxFe2-y/Pb(Zr, Ti)O3 Cylinder Multielectrode Composites". DOI: https://doi.org/10.1016/j.matdes.2015.11.031

This episode is part of the 556-publications series, covering all 556 of Professor Alex Volinsky's research publications.

Voices: Elena and Marcus (AI-generated).

In this episode we discuss the paper "Numerical Simulation and Experimental Study of the Hydrostatic Spindle with Orifice Restrictors" (DOI: https://doi.org/10.2174/1874155x01610010079), examining numerical simulation and experimental study of a hydrostatic spindle with orifice restrictors. Part of the 556 publications series of Professor Volinsky. This episode features AI-generated voices of Elena and Marcus.

In this episode we discuss the paper "Treatment Method of Hazardous Pickling Sludge by Reusing as Glassceramics Nucleation Agent" (DOI: https://doi.org/10.1007/s12598-015-0673-4), on turning hazardous pickling sludge into a glass-ceramics nucleation agent. Part of the 556 publications series of Professor Volinsky. This episode features AI-generated voices of Elena and Marcus.

In this episode we discuss the paper "Synthesis and Characterization of MC Nylon/Modified Yttrium Hydroxide Nanocomposites" (DOI: https://doi.org/10.1002/app.43356), exploring how modified yttrium hydroxide nanorods toughen MC nylon. Part of the 556 publications series of Professor Volinsky. This episode features AI-generated voices of Elena and Marcus.

In this episode we discuss the paper "Fabrication and Characterization of Anodic Oxide Nanotubes on TiNb Alloys" (DOI: https://doi.org/10.1007/s12598-015-0675-2), covering how anodic oxide nanotubes grown on TiNb alloys can improve implant surfaces. Part of the 556 publications series of Professor Volinsky. This episode features AI-generated voices of Elena and Marcus.

In this episode we discuss the paper "Hot Deformation and Dynamic Recrystallization Behavior of the Cu-Cr-Zr-Y Alloy" (DOI: https://doi.org/10.1007/s11665-016-1914-x), exploring how hot deformation drives dynamic recrystallization in the Cu-Cr-Zr-Y alloy. Part of the 556 publications series of Professor Volinsky. This episode features AI-generated voices of Elena and Marcus.

In this episode, Professor Alex Volinsky discusses the paper "Hot Deformation Characteristics and Processing Maps of the Cu-Cr-Zr-Ag Alloy". Paper: https://doi.org/10.1007/s11665-016-1937-3 This episode is part of the 556-publications series. Voices are AI-generated (Elena and Marcus).

In this episode, Professor Alex Volinsky discusses the paper "Externally Applied Stress Sign and Film Elastic Properties Effects on Brittle Film Fracture". Paper: https://doi.org/10.1080/14786435.2015.1132018 This episode is part of the 556-publications series. Voices are AI-generated (Elena and Marcus).

In this episode, Professor Alex Volinsky discusses the paper "Online Elearning Application for Practicing Foreign Language Skills with Native Speakers". Paper: https://doi.org/10.1186/s40660-016-0009-1 This episode is part of the 556-publications series. Voices are AI-generated (Elena and Marcus).

In this episode, Professor Alex Volinsky discusses the paper "Facile Fabrication of Organic/Inorganic Nanotube Heterojunction Arrays for Enhanced Photoelectrochemical Water Splitting". Paper: https://doi.org/10.1039/c5nr07893h This episode is part of the 556-publications series. Voices are AI-generated (Elena and Marcus).

In this episode, Professor Alex Volinsky discusses the paper "Processing Maps for the Cu-Cr-Zr-Y Alloy Hot Deformation Behavior". Paper: https://doi.org/10.1016/j.msea.2016.03.033 This episode is part of the 556-publications series. Voices are AI-generated (Elena and Marcus).

In this episode, Professor Alex Volinsky discusses the paper "Onestep Crystallization Kinetic Parameters of the Glassceramics Prepared from Stainless Steel Slag and Pickling Sludge". Paper: https://doi.org/10.1016/s1006-706x(16)30037-1 This episode is part of the 556-publications series. Voices are AI-generated (Elena and Marcus).

In this episode, Professor Alex Volinsky discusses the paper "Characterization of the Hot Deformation Behavior of Cu-Cr-Zr Alloy by Processing Maps". Paper: https://doi.org/10.1007/s40195-016-0404-3 This episode is part of the 556-publications series. Voices are AI-generated (Elena and Marcus).

In this episode, Professor Alex Volinsky discusses the paper "E-Learning Collaborative System for Practicing Foreign Languages with Native Speakers". Paper: https://doi.org/10.14569/ijacsa.2016.070306 This episode is part of the 556-publications series. Voices are AI-generated (Elena and Marcus).

In this episode, Professor Alex Volinsky discusses the paper "Polymer Content and Particle Size Effects on Polymerbonded Terfenol-D/PZT Magnetoelectric Composites". Paper: https://doi.org/10.1016/j.matlet.2016.03.139 This episode is part of the 556-publications series. Voices are AI-generated (Elena and Marcus).

In this episode, Professor Alex Volinsky discusses the paper "Macromechanism of Polyvinyl Chloride Shrink Sleeves Embossed Marking".

Paper: https://doi.org/10.1002/app.43691

This episode is part of the 556-publications series.

Voices are AI-generated (Elena and Marcus).

In this episode, we discuss the research paper "Microstructure and Precipitate's Characterization of the Cu-Ni-Si-P Alloy" (no DOI available). This episode is part of the 556-publications series, featuring Professor Alex Volinsky's published research. The voices in this episode were generated using AI (Elena and Marcus).

In this episode, we discuss the research paper "Defects Evolution of Nanoporous AuAg(Pt) During Thermal Coarsening". Read the full paper here: https://doi.org/10.1016/j.scriptamat.2016.03.033. This episode is part of the 556-publications series, featuring Professor Alex Volinsky's published research. The voices in this episode were generated using AI (Elena and Marcus).

In this episode, we discuss the research paper "Dynamic Recrystallization Model of the Cu-Cr-Zr-Ag Alloy Under Hot Deformation". Read the full paper here: https://doi.org/10.1557/jmr.2016.140. This episode is part of the 556-publications series, featuring Professor Alex Volinsky's published research. The voices in this episode were generated using AI (Elena and Marcus).

In this episode, we discuss the research paper "Dynamic Recrystallization Behavior and Processing Map of the Cu–Cr–Zr–Nd Alloy". Read the full paper here: https://doi.org/10.1186/s40064-016-2317-z. This episode is part of the 556-publications series, featuring Professor Alex Volinsky's published research. The voices in this episode were generated using AI (Elena and Marcus).

In this episode, we discuss the research paper "One Step Synthesis of Vanadium Pentoxide Sheets as Cathodes for Lithium Ion Batteries".

Read the full paper here: https://doi.org/10.1016/j.electacta.2016.04.169

This episode is part of the 556-publications series, featuring Professor Alex Volinsky's published research.

The voices in this episode were generated using AI (Elena and Marcus).

In this episode, Elena and Marcus discuss the paper "Size-Dependent Concentrations of Thermal Vacancies in Solid Films" (https://doi.org/10.1039/c6cp03419e), part of the 556 publications series from Professor Alex Volinsky's research group. The voices of Elena and Marcus are AI-generated.

In this episode, Elena and Marcus discuss the paper "Annealing Temperature Effects on Optical and Photoelectric Properties of Sputtered Indium-Doped PbSe Thin Films" (https://doi.org/10.1007/s10854-015-3939-6), part of the 556 publications series from Professor Alex Volinsky's research group. The voices of Elena and Marcus are AI-generated.

In this episode, Elena and Marcus discuss the paper "Size-Dependent Vacancy Concentration in Nickel, Copper, Gold, and Platinum Nanoparticles" (https://doi.org/10.1021/acs.jpcc.6b05712), part of the 556 publications series from Professor Alex Volinsky's research group. The voices of Elena and Marcus are AI-generated.

In this episode, Elena and Marcus discuss the paper "Hydrostatic Pressure Effects on Hydrogen Permeation in A514 Steel During Galvanostatic Hydrogen Charging" (https://doi.org/10.1016/j.corsci.2016.07.001), part of the 556 publications series from Professor Alex Volinsky's research group. The voices of Elena and Marcus are AI-generated.

In this episode, Elena and Marcus discuss the paper "Enhanced Bond Strength and Bioactivity of Interconnected 3D TiO2 Nanoporous Layer on Titanium Implants" (https://doi.org/10.1016/j.surfcoat.2016.05.038), part of the 556 publications series from Professor Alex Volinsky's research group. The voices of Elena and Marcus are AI-generated.

Paper: Blended Powder Semisolid Forming of Al7075/Al2O3 Composites: Investigation of Microstructure and Mechanical Properties

DOI: https://doi.org/10.1016/j.matdes.2016.07.042

This episode is part of the 556-publications series.

The voices in this episode are AI-generated, featuring Elena and Marcus.

Paper: Eigenstress Model for Electrochemistry of Solid Surfaces

DOI: https://doi.org/10.1038/srep26897

This episode is part of the 556-publications series.

The voices in this episode are AI-generated, featuring Elena and Marcus.

Paper: Boron Doping Effects on Microcrystalline Silicon Film Roughness Studied by Spectroscopic Ellipsometry

DOI: https://doi.org/10.1016/j.jallcom.2016.05.212

This episode is part of the 556-publications series.

The voices in this episode are AI-generated, featuring Elena and Marcus.

Paper: Ptplating Effect on La-TZM Alloy High Temperature Oxidation Behavior

DOI: https://doi.org/10.1016/j.jallcom.2016.06.183

This episode is part of the 556-publications series.

The voices in this episode are AI-generated, featuring Elena and Marcus.

Paper: Synthesis and Characterization of Al-Doped ZnO as a Prospective High Adsorption Material

DOI: https://doi.org/10.1111/jace.14282

This episode is part of the 556-publications series.

The voices in this episode are AI-generated, featuring Elena and Marcus.

Paper: Layer Thickness and Sequence Effects on Resonant Magnetoelectric Coupling in Ni/Pb(Zr, Ti)O3 Cylindrical Composites

DOI: https://doi.org/10.1016/j.matlet.2016.08.042

This episode is part of the 556-publications series.

The voices in this episode are AI-generated, featuring Elena and Marcus.

Paper: Growth Mechanism and Magnetism in Carbothermal Synthesized Fe3O4 Nanoparticles from Solution Combustion Precursors

DOI: https://doi.org/10.1016/j.jmmm.2016.07.030

This episode is part of the 556-publications series.

The voices in this episode are AI-generated, featuring Elena and Marcus.

Paper: Glass-Ceramics One-Step Crystallization Accomplished by Building Ca2+ and Mg2+ Fast Diffusion Layer Around Diopside Crystal

DOI: https://doi.org/10.1016/j.jallcom.2016.07.027

This episode is part of the 556-publications series.

The voices in this episode are AI-generated, featuring Elena and Marcus.

Paper: Communication and Gamification in the Web-Based Foreign Language Educational System

DOI: https://doi.org/10.4018/ijwltt.2016100102

This episode is part of the 556-publications series.

The voices in this episode are AI-generated, featuring Elena and Marcus.

Paper: Internal Stress Analysis of Electroplated Films Based on Electron Theory

DOI: https://doi.org/10.1016/s1003-6326(16)64331-5

This episode is part of the 556-publications series.

The voices in this episode are AI-generated, featuring Elena and Marcus.

Part of the 556 publications series. In this episode, Elena and Marcus discuss the paper "Facile Preparation of Hexagonal WO3·0.33H2O/C Nanostructures and Its Electrochemical Properties for Lithium-Ion Batteries". DOI: https://doi.org/10.1016/j.apsusc.2016.10.107. Voices Elena and Marcus are AI-generated.

Part of the 556 publications series. In this episode, Elena and Marcus discuss the paper "Sputtering Power Effects on Growth and Mechanical Properties of Cr2AlC MAX Phase Coatings". DOI: https://doi.org/10.3390/met6110265. Voices Elena and Marcus are AI-generated.

Part of the 556 publications series. In this episode, Elena and Marcus discuss the paper "Mechanical Characterization of Crosslinking Effect in Polydimethylsiloxane Using Nanoindentation". DOI: https://doi.org/10.1016/j.polymertesting.2016.10.034. Voices Elena and Marcus are AI-generated.

Part of the 556 publications series. In this episode, Elena and Marcus discuss the paper "Graphene-Like MoS2 Prepared by the Intercalation-Detonation Method". DOI: https://doi.org/10.1016/j.matlet.2016.11.005. Voices Elena and Marcus are AI-generated.

Part of the 556 publications series. In this episode, Elena and Marcus discuss the paper "Precipitated Al2O3 Phase Characterization in Internally Oxidized Cu-Al Alloy Sheets". DOI: https://doi.org/10.1016/j.jallcom.2016.11.114. Voices Elena and Marcus are AI-generated.

Part of the 556 publications series. In this episode, Elena and Marcus discuss the paper "Environmental Effects on BaTiO3 Polarization Dynamics Characterized by Piezoresponse Force Microscopy". Voices Elena and Marcus are AI-generated.

Part of the 556 publications series. In this episode, Elena and Marcus discuss the paper "Peer-to-Peer Foreign Language E-Learning Stimulated by Gamification and Virality". Voices Elena and Marcus are AI-generated.

Part of the 556 publications series. In this episode, Elena and Marcus discuss the paper "Optimizing Ductility and Fracture of Amorphous Metal Thin Films on Polyimide Using Multilayers" (DOI: https://doi.org/10.1007/s10704-016-0166-y). Voices Elena and Marcus are AI-generated.

Part of the 556 publications series. In this episode, Elena and Marcus discuss the paper "Substrate Frequency Effects on CrxN Coatings Deposited by DC Magnetron Sputtering" (DOI: https://doi.org/10.1007/s11665-016-2426-4). Voices Elena and Marcus are AI-generated.

This episode discusses the paper "Immobilization Mechanism of Pb in Fly Ash-Based Geopolymer" (https://doi.org/10.1016/j.conbuildmat.2016.12.139).

This episode is part of Professor Alex Volinsky's series presenting his 556 publications.

Voices by AI-generated Elena and Marcus.

This episode discusses the paper "Low-Temperature Combustion Synthesis of Hexagonal WO3·0.33H2O@C as Anode Material for Lithium-Ion Batteries" (https://doi.org/10.1016/j.jallcom.2017.01.089).

This episode is part of Professor Alex Volinsky's series presenting his 556 publications.

Voices by AI-generated Elena and Marcus.

This episode discusses the paper "Synthesis of High-Density TZM Alloy Based on Mechanochemistry and Particle Size Distribution Theories" (https://doi.org/10.1016/j.jallcom.2016.12.249).

This episode is part of Professor Alex Volinsky's series presenting his 556 publications.

Voices by AI-generated Elena and Marcus.

This episode discusses the paper "Effects of Ag Addition on Hot Deformation Behavior of Cu-Ni-Si Alloys" (https://doi.org/10.1002/adem.201600607).

This episode is part of Professor Alex Volinsky's series presenting his 556 publications.

Voices by AI-generated Elena and Marcus.

This episode discusses the paper "Numerical Simulation and Experimental Study of the Air-Cooled Motorized Spindle" (https://doi.org/10.1177/0954406216631781).

This episode is part of Professor Alex Volinsky's series presenting his 556 publications.

Voices by AI-generated Elena and Marcus.

In this episode, we discuss the paper "XPS and AFM Investigations of Ti-Al-N Coatings Fabricated Using DC Magnetron Sputtering at Various Nitrogen Flow Rates and Deposition Temperatures" (https://doi.org/10.3390/met7020052). This episode is part of a series covering all 556 publications of Professor Alex Volinsky. The voices of Elena and Marcus in this episode were generated by AI.

In this episode, we discuss the paper "Cyclic Microbridge Testing of Graphene Oxide Membrane" (https://doi.org/10.1016/j.carbon.2017.02.022). This episode is part of a series covering all 556 publications of Professor Alex Volinsky. The voices of Elena and Marcus in this episode were generated by AI.

In this episode, we discuss the paper "Edge Eigenstress and Eigendisplacement of Armchair Molybdenum Disulfide Nanoribbons" (https://doi.org/10.1016/j.physleta.2017.03.002). This episode is part of a series covering all 556 publications of Professor Alex Volinsky. The voices of Elena and Marcus in this episode were generated by AI.

In this episode, we discuss the paper "Failure Analysis of High Nickel Alloy Steel Seal Ring Used in Turbomachinery" (https://doi.org/10.1016/j.engfailanal.2017.03.011). This episode is part of a series covering all 556 publications of Professor Alex Volinsky. The voices of Elena and Marcus in this episode were generated by AI.

In this episode, we discuss the paper "Applications and Thermodynamic Analysis of Equilibrium Solution for Secondary Phases in Ti-N-C Gear Steel System with Nanoparticles" (https://doi.org/10.3390/met7040110). This episode is part of a series covering all 556 publications of Professor Alex Volinsky. The voices of Elena and Marcus in this episode were generated by AI.

Episode 242 of the Professor Alex Volinsky podcast.

In this episode, we explore the paper "Modified Qigong Breathing Exercise for Reducing the Sense of Hunger on an Empty Stomach".

DOI: https://doi.org/10.1177/2156587217707143

This episode is part of the 556-publications series highlighting the scientific work of Professor Alex Volinsky.

Featuring AI-generated voices of Elena and Marcus.

Episode 241 of the Professor Alex Volinsky podcast.

In this episode, we explore the paper "High Temperature Brittle Film Adhesion Measured from Annealinginduced Circular Blisters".

DOI: https://doi.org/10.1016/j.actamat.2017.07.026

This episode is part of the 556-publications series highlighting the scientific work of Professor Alex Volinsky.

Featuring AI-generated voices of Elena and Marcus.

Episode 240 of the Professor Alex Volinsky podcast.

In this episode, we explore the paper "Film Thickness Effect on Texture and Residual Stress Sign Transition in Sputtered TiN Thin Films".

DOI: https://doi.org/10.1016/j.ceramint.2017.06.050

This episode is part of the 556-publications series highlighting the scientific work of Professor Alex Volinsky.

Featuring AI-generated voices of Elena and Marcus.

Episode 239 of the Professor Alex Volinsky podcast.

In this episode, we explore the paper "Aging Strengthening Mechanism of the Cu-1.0 Zr Alloy".

DOI: https://doi.org/10.1007/s11661-017-4292-6

This episode is part of the 556-publications series highlighting the scientific work of Professor Alex Volinsky.

Featuring AI-generated voices of Elena and Marcus.

Episode 238 of the Professor Alex Volinsky podcast.

In this episode, we explore the paper "A Statistical Study on the Effect of Hydrostatic Pressure on Metastable Pitting Corrosion of X70 Pipeline Steel".

DOI: https://doi.org/10.3390/ma10111307

This episode is part of the 556-publications series highlighting the scientific work of Professor Alex Volinsky.

Featuring AI-generated voices of Elena and Marcus.

Episode 237 of the Professor Alex Volinsky podcast.

In this episode, we explore the paper "Hydrostatic Pressure Effects on the Kinetic Parameters of Hydrogen Evolution and Permeation in Armco Iron".

DOI: https://doi.org/10.1016/j.electacta.2017.09.181

This episode is part of the 556-publications series highlighting the scientific work of Professor Alex Volinsky.

Featuring AI-generated voices of Elena and Marcus.

Episode 236 of the Professor Alex Volinsky podcast.

In this episode, we explore the paper "Small Y Addition Effects on Hot Deformation Behavior of Copper-Matrix Alloys".

DOI: https://doi.org/10.1002/adem.201700197

This episode is part of the 556-publications series highlighting the scientific work of Professor Alex Volinsky.

Featuring AI-generated voices of Elena and Marcus.

Episode 235 of the Professor Alex Volinsky podcast.

In this episode, we explore the paper "Hot Workability and Constitutive Model of the Cu-Zr-Nd Alloy".

DOI: https://doi.org/10.1016/j.vacuum.2017.09.017

This episode is part of the 556-publications series highlighting the scientific work of Professor Alex Volinsky.

Featuring AI-generated voices of Elena and Marcus.

Episode 234 of the Professor Alex Volinsky podcast.

In this episode, we explore the paper "Stress Corrosion Cracking in Materials".

This episode is part of the 556-publications series highlighting the scientific work of Professor Alex Volinsky.

Featuring AI-generated voices of Elena and Marcus.

Episode 233 of the Professor Alex Volinsky podcast.

In this episode, we explore the paper "Polymer-Based Magnetoelectric Composites: Polymer as a Binder".

DOI: https://doi.org/10.1002/9783527801336.ch3b

This episode is part of the 556-publications series highlighting the scientific work of Professor Alex Volinsky.

Featuring AI-generated voices of Elena and Marcus.

In this episode of the Professor Alex Volinsky podcast series, hosts Elena and Marcus discuss the paper "Why China Stinks? Deficiencies in Chinese Plumbing and Ventilation Systems (in Chinese)" (no DOI available). This podcast series covers Professor Alex Volinsky's 556 scientific publications, one episode per paper. The voices of Elena and Marcus are AI-generated.

In this episode of the Professor Alex Volinsky podcast series, hosts Elena and Marcus discuss the paper "Scaling Effects on Color and Transparency of Multilayer Polyethylene Films in Polarized Light" (DOI: https://doi.org/10.1002/adv.21708). This podcast series covers Professor Alex Volinsky's 556 scientific publications, one episode per paper. The voices of Elena and Marcus are AI-generated.

In this episode of the Professor Alex Volinsky podcast series, hosts Elena and Marcus discuss the paper "Solution Combustion Synthesis of Nanostructured Iron Oxides with Controllable Morphology, Composition and Electrochemical Performance" (DOI: https://doi.org/10.1016/j.ceramint.2017.12.004). This podcast series covers Professor Alex Volinsky's 556 scientific publications, one episode per paper. The voices of Elena and Marcus are AI-generated.

In this episode of the Professor Alex Volinsky podcast series, hosts Elena and Marcus discuss the paper "Residual Stress Control in CrAlN Coatings Deposited on Ti Alloys" (DOI: https://doi.org/10.1016/j.ceramint.2017.12.037). This podcast series covers Professor Alex Volinsky's 556 scientific publications, one episode per paper. The voices of Elena and Marcus are AI-generated.

In this episode of the Professor Alex Volinsky podcast series, hosts Elena and Marcus discuss the paper "Synthesis of Lead Sulfide by Heavy Metal Gypsum Matched with Lead Paste" (DOI: https://doi.org/10.1016/j.jclepro.2017.12.082). This podcast series covers Professor Alex Volinsky's 556 scientific publications, one episode per paper. The voices of Elena and Marcus are AI-generated.

Episode 227 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 226 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 225 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 224 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 223 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 222 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 221 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 220 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 219 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 218 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 217 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 216 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 215 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 214 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 213 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 212 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 211 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 210 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 209 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 208 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 207 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 206 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 205 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 204 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 203 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 202 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 201 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 200 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 199 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 198 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 197 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 196 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 195 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 194 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 193 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 192 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 191 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 190 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 189 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 188 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 187 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 186 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 185 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 184 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 183 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 182 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 181 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 180 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 179 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 178 of the Professor Alex Volinsky podcast. Hosts Elena and Marcus. AI-generated voices.

Episode 177 of the Professor Alex Volinsky podcast. Blended elemental powders, cold-pressed, vacuum-sintered at 1200 °C with no applied pressure: a Ti-23Al-17Nb intermetallic at 98.7% density, oxygen near 0.1 wt%, fine B2/α2/orthorhombic microstructure — 941 MPa tensile, 11.7% elongation. The cheap route works. Published hyphenated title used. Based on the paper: High-density and low-interstitial Ti-23Al-17Nb Prepared by Vacuum Pressureless Sintering from Blended Elemental Powders; H. Wang, C. Zhang, F. Yang, P. Cao, Z. Guo, B. Lu, C. Chen, P. Liu, A.A. Volinsky; Vacuum, 2019, Vol. 164, pp. 62–65. Hosts Elena and Marcus. AI-generated voices.

Episode 176 of the Professor Alex Volinsky podcast. Mg-air cells corrode in watery electrolytes; this study ran them in the ionic liquid [EMIM][TFSI] and reported better discharge when mixed with butyl acetate or water — roughly doubling energy density vs the pure liquid. Figures come from a secondary technical summary, presented as approximate and attributed; the abstract was not retrievable. Crossref pages A1103–A1106 used. Based on the paper: Electrochemical Performance of 1-Ethyl-3-Methylimidazolium Bis(Trifluoromethylsulfonyl)Imide Ionic Liquid as Electrolyte for Primary Mg-Air Batteries; J.L. Zhang, J.L. Ma, G.X. Wang, Y.Q. Li, A.A. Volinsky; Journal of The Electrochemical Society, 2019, Vol. 166, pp. A1103–A1106. Hosts Elena and Marcus. AI-generated voices.

Episode 175 of the Professor Alex Volinsky podcast. Gleeble hot compression of Al2O3-Cu/(W,Cr) contacts at 650–950 °C: chromium extruded into strips, tungsten barely deformed, higher tungsten raised flow stress, nano-alumina pinned dislocations against softening. The processing knowledge for forming these contacts undamaged — companion to episode 152. Based on the paper: Thermal Deformation Behavior of the Al2O3-Cu/(W, Cr) Electrical Contacts; X. Zhang, Y. Zhang, B. Tian, Y. Jia, Y. Liu, K. Song, A.A. Volinsky; Vacuum, 2019, Vol. 164, pp. 361–366. Hosts Elena and Marcus. AI-generated voices.

Episode 174 of the Professor Alex Volinsky podcast. AFM did double duty on nanoporous gold: topographic imaging mapped few-nanometer ligaments while current-sensing mode read the surface oxide's electrical character — likely residual silver oxide — which suppresses coarsening. In-situ electrochemistry caught the structure breathing 40 nm across 0.35–0.7 V. Based on the paper: Atomic Force Microscopy Study of Nanoporous Gold Surface and Electrochemical Properties; P. Gao, P. Qian, L. Qiao, A.A. Volinsky, Y. Su; Scripta Materialia, 2019, Vol. 168, pp. 1–4. Hosts Elena and Marcus. AI-generated voices.

Episode 173 of the Professor Alex Volinsky podcast. The title poses the lab question: albumin, the blood's dominant protein, meets pure zinc — a candidate biodegradable implant metal — in artificial plasma, and the corrosion rate is what disappearing-implant designers need. Abstract not retrievable: the episode works from the title and established zinc-corrosion science only, with no clinical implications discussed. Based on the paper: Influences of Albumin on in vitro Corrosion of Pure Zn in Artificial Plasma; L. Liu, Y. Meng, A.A. Volinsky, H.-J. Zhang, L.-N. Wang; Corrosion Science, 2019, Vol. 153, pp. 341–356. Hosts Elena and Marcus. AI-generated voices.

Episode 172 of the Professor Alex Volinsky podcast. A TiO2 compact underlayer plus 15 h hydrothermal treatment densified the nanorod array and cleaned up the crystal, turning into measurably more photocurrent — fewer defects, fewer recombination centers. Process control as device engineering. Published "one-dimensional" used; corpus spelling kept in the file slug only. Based on the paper: Enhanced Morphology and Photoelectric Properties of One-Dimensional TiO2 Nanorod Array Films; Y. Deng, Z. Ma, F. Ren, G. Wang, A.A. Volinsky; Chemical Physics Letters, 2019, Vol. 724, pp. 42–49. Hosts Elena and Marcus. AI-generated voices.

Episode 171 of the Professor Alex Volinsky podcast. A protective coating made fatigue worse: CrAlN cut the TC4 titanium fatigue limit from ~520 to ~320 MPa (~40% drop) — cracks started in the brittle coating and attacked the interface. The authors' coating-cracking-driven substrate damage model — a caution for fatigue-critical titanium. Based on the paper: Brittle Coating Effects on Fatigue Cracks Behavior in Ti Alloys; Y. Bai, Y. Xi, K. Gao, H. Yang, X. Pang, X. Yang, A.A. Volinsky; International Journal of Fatigue, 2019, Vol. 125, pp. 432–439. Hosts Elena and Marcus. AI-generated voices.

Episode 170 of the Professor Alex Volinsky podcast. Cast-rolled Cu-Al clad plates: bond strength rose then collapsed with annealing temperature — CuAl2 at 250–300 °C helped, Cu9Al4 at 300–400 °C thickened the interface 1→11 µm while peel strength fell 42→12 N/mm and fracture turned brittle. Optimum 300 °C/3 h. 8-author record incl. Volinsky used; Crossref lists 7. Based on the paper: Effects of Annealing Temperature on Microstructure and Bond Strength of Cast-rolling Cu-Al Clad Plates; Z. Liu, W. Wang, Y. Huang, J. Liu, J. Xie, L. Guo, M. Zhang, A.A. Volinsky; Materials Research Express, 2019, Vol. 6(8), article 086556. Hosts Elena and Marcus. AI-generated voices.

Episode 169 of the Professor Alex Volinsky podcast. No experiment, no findings claimed: the guest editorial by Ting Tsui and Alex Volinsky introduces the Micromachines special issue on small-scale deformation. A field overview — nanoindentation's thirty-year record, what advanced techniques add, and why small-scale measurement is where materials science gets honest. Based on the paper: Editorial for the Special Issue on Small-Scale Deformation using Advanced Nanoindentation Techniques; T. Tsui, A.A. Volinsky; Micromachines, 2019, Vol. 10(4), article 269. Hosts Elena and Marcus. AI-generated voices.

Episode 168 of the Professor Alex Volinsky podcast. In Cu-Ni-Si, cobalt accelerates precipitation but coarsens it and degrades properties — more isn't always better. Sweet spot: lower-Co alloy, 500 °C/2 h, 40% cold work — 250 HV with 43% IACS, from orthorhombic (Ni,Co)2Si precipitates with defined orientation relationships to the copper matrix. Based on the paper: Co Effects on Cu-Ni-Si Alloys Microstructure and Physical Properties; Z. Zhao, Y. Zhang, B. Tian, Y. Jia, Y. Liu, K. Song, A.A. Volinsky; Journal of Alloys and Compounds, 2019, Vol. 797, pp. 1327–1337. Hosts Elena and Marcus. AI-generated voices.

Episode 167 of the Professor Alex Volinsky podcast. Elastic-plastic FE of active-metal-brazed ceramic substrates: the dangerous stress sits on the ceramic side, where axial residual stress cracks the substrate — elastic-only models mislead. Thickness, size, and clamping pressure are the designer's dials; external pressure cuts both stress and warpage. Based on the paper: Residual Stress and Warpage of AMB Ceramic Substrate Studied by Finite Element Simulations; S.-S. Zhang, H.-S. Yang, K. Gao, L. Yan, X.-L. Pang, A.A. Volinsky; Microelectronics Reliability, 2019, Vol. 98, pp. 49–55. Hosts Elena and Marcus. AI-generated voices.

Episode 166 of the Professor Alex Volinsky podcast. Synchrotron Laue nano-diffraction mapped strain around grain boundaries in hydrogen-charged iron: random boundaries accumulated high strain and blistered; special coincidence-site-lattice boundaries resisted. Boundary character is a real lever against hydrogen damage — boundary engineering, not just chemistry. Based on the paper: Synchrotron X-ray Laue Diffraction Study of Hydrogen-induced Blisters on Iron Grain Boundaries; X. Tao, G.-C. Lv, J.-W. Kou, X. Xiong, A.A. Volinsky, C. Ku, K. Chen, Y.-J. Su; Scripta Materialia, 2019, Vol. 169, pp. 82–86. Hosts Elena and Marcus. AI-generated voices.

Episode 165 of the Professor Alex Volinsky podcast. A CuO-Al booster reaction supplied the heat to drive in-situ TiC-Al2O3 synthesis to completion on copper during casting, with infiltrating molten copper densifying the coating. Hardness up 5x (40→195 HB), wear mass loss down 17x (7.98→0.44 g at 40 N), metallurgical bond 293 MPa. Based on the paper: In-situ Synthesis of TiC-Al2O3 Coating on Copper Surface; F. Yang, Q. Qin, T. Shi, X. Lu, C.-G. Chen, Z.-M. Guo, A.A. Volinsky; Surface and Coatings Technology, 2019, Vol. 373, pp. 65–74. Hosts Elena and Marcus. AI-generated voices.

Episode 164 of the Professor Alex Volinsky podcast. Flake, compacted, and spheroidal graphite irons at nearly equal tensile strength still needed measurably different cutting forces: graphite shape forces different pearlite designs to reach equal strength, and the hardness differences drive tool load. Harder irons cut harder, but not proportionally — strength alone can't predict machinability. Based on the paper: Effect of Microstructure and Mechanical Properties on Cutting Force of Different Cast Irons with Similar Tensile Strength; J. Ren, Z. Li, Y. Xiong, F.-J. Li, F. Ren, A.A. Volinsky; China Foundry, 2019, Vol. 16, pp. 177–183. Hosts Elena and Marcus. AI-generated voices.

Episode 163 of the Professor Alex Volinsky podcast. Coating and casting in one pour: Ti/graphite powders with PTFE pasted on expendable foam, then molten aluminum ignited the self-propagating reaction, leaving a millimeter-thick in-situ TiC-particle coating on the part. Uniform TiC, superior properties and wear resistance, plus a densification model under critical wetting. Based on the paper: Characterization and Integrated Fabrication of Al Components with Thick TiCp/Al Composite Coatings via Self-Propagating Reaction; C.-G. Chen, T. Shi, W. Wang, Z.-M. Guo, A.A. Volinsky; Journal of Materials Engineering and Performance, 2019, Vol. 28, pp. 4485–4495. Hosts Elena and Marcus. AI-generated voices.

Episode 162 of the Professor Alex Volinsky podcast. For TiB2-reinforced copper, conductivity tracks particle volume fraction, size, and distribution — not volume fraction alone — and adding a particle-spacing parameter to the Maxwell model fits experiment excellently. Stated caveat: a fitting parameter is useful engineering, descriptive rather than first-principles predictive. Based on the paper: Effects of Particle Characteristic Parameters on the Electrical Conductivity of TiB2/Cu Composites: A Modified Model for Predicting Their Electrical Conductivity; Jiang Feng, Shuhua Liang, Kexing Song, Xiuhua Guo, Yi Zhang, Guohui Li, Alex A. Volinsky; Journal of Materials Engineering and Performance, 2019, Vol. 28, pp. 4316–4323. Hosts Elena and Marcus. AI-generated voices.

Episode 161 of the Professor Alex Volinsky podcast. A ~5 nm LiAl5O8 coating on a Li-rich cathode suppressed voltage decay: 243.5 mAh/g, 82.63% first-cycle efficiency, 95.8% capacity after 100 cycles vs 82.8% uncoated — the layer blocks HF attack and oxygen loss. Full 8-author published list used, including Fang Yang and Shengzeng Lin, omitted from the corpus record. Based on the paper: Suppressed voltage decay and improved electrochemical performance by coating LiAl5O8 on the surface of Li1.2Mn0.54Ni0.13Co0.13O2; Fang Yang, Shengzeng Lin, Zhimeng Guo, Yanru Shao, Biao Zhang, Xiaodong Zhang, Shuhao Yan, Alex A. Volinsky; Journal of Alloys and Compounds, 2019, Vol. 805, pp. 1034–1043. Hosts Elena and Marcus. AI-generated voices.

Episode 160 of the Professor Alex Volinsky podcast. As-cast Zn-0.8Li is brittle (0.2% elongation) and stent-useless; hot-warm rolling rebuilt it with sub-micron grains and nano-sized metastable precipitates, delivering strength with ductility. Companion to episode 158's implant study. Only the data table and conclusions were retrievable — stated plainly; nothing beyond them claimed. Based on the paper: High-performance hot-warm rolled Zn-0.8Li alloy with nano-sized metastable precipitates and sub-micron grains for biodegradable stents; Z. Li, Z.-Z. Shi, Y. Hao, H. Li, X. Liu, A.A. Volinsky, H. Zhang, L. Wang; Journal of Materials Science and Technology, 2019, Vol. 35, pp. 2618–2624. Hosts Elena and Marcus. AI-generated voices.

Episode 159 of the Professor Alex Volinsky podcast. Nine wt% of cheap steel-industry high-carbon ferrochrome in powder-metallurgy titanium refined beta grains, thinned alpha lamellae, and precipitated TiC at boundaries, with Fe/Cr stabilizing beta phase. Result: 480 HV (+60% vs Ti6Al4V), 1228 MPa tensile, 1140 MPa yield — high performance at lower cost. Based on the paper: High-Carbon Ferrochrome Effects on Microstructure and Mechanical Properties of Powder Metallurgy Titanium Alloys; Boxin Lu, Ce Zhang, Zhimeng Guo, Fang Yang, Haiying Wang, Alex A. Volinsky, Li You; Journal of Materials Engineering and Performance, 2019, Vol. 28(9), pp. 5361–5368. Hosts Elena and Marcus. AI-generated voices.

Episode 158 of the Professor Alex Volinsky podcast. A Zn-0.8Cu biodegradable stent in porcine coronary arteries held structure 6 months, disintegrated after 9, endothelialized within a month, and left ~28% of its volume at 2 years — no thrombosis or inflammation, degradation products clearing into the vessel wall. Neutrally framed: preclinical large-animal study, not human clinical data. Based on the paper: Long-term in vivo study of biodegradable Zn-Cu stent: A 2-year implantation evaluation in porcine coronary artery; Chao Zhou et al. (28 authors, incl. A.A. Volinsky); Acta Biomaterialia, 2019, Vol. 97, pp. 657–670. Hosts Elena and Marcus. AI-generated voices.

Episode 157 of the Professor Alex Volinsky podcast. Real waste lamp phosphors with glass went through desilication (~88% glass removed), alkaline-fusion decomposition, and two-step acid leaching: 94% rare-earth recovery in the lab (Y 96, Eu 99, Ce 81, Tb 92), 90% at ton-scale pilot, economics +1115 €/ton. The authors' own caveat: red phosphor can react with the others in the NaOH melt. Based on the paper: Multiscale Recycling Rare Earth Elements from Real Waste Trichromatic Phosphors Containing Glass; H. Liu, S. Li, B. Wang, K. Wang, R. Wu, C. Ekberg, A.A. Volinsky; Journal of Cleaner Production, 2019, Vol. 238, article 117998. Hosts Elena and Marcus. AI-generated voices.

Episode 156 of the Professor Alex Volinsky podcast. In 50CrVA spring steel, thermodynamics decides whether Ti/V/N/C precipitate above the liquidus as micron inclusions or below it as nanoparticles — and fatigue life drops ~10x across that size change (208–242k vs 43–63.5k cycles). Engineer the precipitation window, engineer fatigue life. Published title used ("Multiple Microelements' Coupling Behavior"); corpus wording differs. Based on the paper: Thermodynamics Analysis of Multiple Microelements' Coupling Behavior in High Fatigue Resistance 50CrVA Spring Steel with Nanoparticles; Y. Wang, L. Fu, M. Zhou, Z. Zhou, X. Pang, S. Zhong, A.A. Volinsky; Materials, 2019, Vol. 12, article 2952. Hosts Elena and Marcus. AI-generated voices.

Episode 155 of the Professor Alex Volinsky podcast. In the BAg25TS brazed steel joint, copper concentrates in the Cu-rich phase and fades with distance, Cu and Zn line the iron grain boundaries, iron diffuses onto the brazing side, and tin depletes at the interface from undercooling. Specimens broke in the seam itself — sound wetting. Abstract not retrievable; chemistry from an indexed copy of the paper text, stated in the episode. Based on the paper: Microproperties and Interface Behavior of the BAg25TS Brazed Joint; L. Zhang, H. Yu, J. Ma, S. Zhong, Y. Jiu, S. Wei, W. Long, A.A. Volinsky; Vacuum, 2019, Vol. 169, article 108928. Hosts Elena and Marcus. AI-generated voices.

Episode 154 of the Professor Alex Volinsky podcast. Copper reinforced with carbon nanotubes and alumina nanoparticles by powder metallurgy: particles at grain boundaries refined grains to ~4 µm and raised hardness and strength over pure copper. Best: Cu-1.5CNTs-0.5Al2O3 at 131 HV, 345 MPa, friction 0.155, wear 3.7×10⁻¹⁴ m³/N·m — alumina carries wear, nanotubes lubricate. Based on the paper: Tribological and Mechanical Properties of Copper Matrix Composites Reinforced with Carbon Nanotube and Alumina Nanoparticles; Y. Pan, X. Lu, A.A. Volinsky, B. Liu, S. Xiao, C. Zhou, Y. Li, M. Chen, X. Qu; Materials Research Express, 2019, Vol. 6, article 116524. Hosts Elena and Marcus. AI-generated voices.

Episode 153 of the Professor Alex Volinsky podcast. A 3D-printed cold-isostatic-pressing capsule — porous internal core plus external shell — pressed Ti-6Al-4V powder from inside and outside at once, forming a crack-free three-way pipe. Sintered at 1230 °C it hit 929 MPa tensile, 862 MPa yield, 15.5% elongation, 382 HV — matching the ASTM B381 forging standard. Abstract from a web-indexed copy of the publisher record. Based on the paper: Ti Alloy Three-Way Pipe Fabricated by the Combination of 3D Printing and Cold Isostatic Pressing; Y. Shao, F. Yang, P. Liu, Z. Feng, X. Lu, Z. Guo, H. Xu, A.A. Volinsky; Journal of Materials Engineering and Performance, 2019, Vol. 28, pp. 6219–6227. Hosts Elena and Marcus. AI-generated voices.

Episode 152 of the Professor Alex Volinsky podcast. Adding chromium to an alumina-strengthened Cu-15W contact composite lowers welding force and mass loss under arcing: 30 V DC switching tests show the Cr-bearing contacts erode less. Based on the paper: Cr Effects on the Electrical Contact Properties of the Al2O3-Cu/15W Composites; X. Zhang, Y. Zhang, B. Tian, Y. Jia, Y. Liu, K. Song, A.A. Volinsky, H. Xue; Nanotechnology Reviews, 2019, Vol. 8, pp. 128-135. Hosts Elena and Marcus. AI-generated voices.

Episode 151 of the Professor Alex Volinsky podcast. A 216-reference review of how nanoscale precipitates resolve copper's strength-conductivity dilemma: particles pin dislocations while purifying the matrix, across Cu-Fe-P, Cu-Ni-Si, and Cu-Cr-Zr systems plus composites. Based on the paper: Review of Nanophase Effects in High Strength and Conductivity Copper Alloys; X. Zhang, Y. Zhang, B. Tian, K. Song, P. Liu, Y. Jia, X. Chen, J. An, Z. Zhao, Y. Liu, A.A. Volinsky, X. Li, T. Yin; Nanotechnology Reviews, 2019, Vol. 8, pp. 383-395. Hosts Elena and Marcus. AI-generated voices.

Episode 150 of the Professor Alex Volinsky podcast. A guest-edited special issue, not a research article: Volinsky and T.Y. Tsui assemble advanced nanoindentation work on small-scale deformation, where tiny metal volumes test far stronger than bulk. Based on the edited volume: Small Scale Deformation using Advanced Nanoindentation Techniques; special issue of Micromachines, 2019, guest-edited by A.A. Volinsky and T.Y. Tsui. Hosts Elena and Marcus. AI-generated voices.

Episode 149 of the Professor Alex Volinsky podcast. Neutral descriptive framing: a 2020 presentation proposing allergy desensitization with dynamized (serially diluted) allergens, illustrated by uncontrolled personal cases of insect-bite, airborne, pet, and food allergies. The author states the experiments are private with no controls; mainstream reviews find no reliable evidence of homeopathy beyond placebo. Based on the presentation: Allergy Desensitization Based on Allergens Dynamization Method; A.A. Volinsky; 2020. English version: International Journal of Homoeopathic Sciences, 2020, Vol. 4(4), pp. 198-201. Hosts Elena and Marcus. AI-generated voices.

Episode 148 of the Professor Alex Volinsky podcast. Neutral descriptive framing: a single case report of a self-experiment — the author treats his own chronic tonsillitis with homeopathy and autonosodes, with no controls and no blinding. Homeopathy's efficacy is not supported by mainstream clinical evidence. Based on the paper: A Clinical Case of Chronic Tonsillitis Treatment Using Homeopathy and Autonosodes; A.A. Volinsky; Russian Homeopathy Portal, Clinical Homeopathy section, 26 December 2020. Hosts Elena and Marcus. AI-generated voices.

Episode 147 of the Professor Alex Volinsky podcast. Estimating the slope and curvature of a regression curve without assuming its shape: differentiation amplifies noise, so the Wang and Lin method behind the npregderiv R package smooths carefully to recover rates of change. Based on the presentation: Nonparametric Estimation of the Derivatives of a Regression Function; O. Savchuk, A.A. Volinsky; conference presentation, 2020 (announcing the npregderiv R package). Hosts Elena and Marcus. AI-generated voices.

Episode 146 of the Professor Alex Volinsky podcast. Co-doping Nd-Fe-B sintered magnets with Dy2O3 and WS2: dysprosium hardens the grain boundaries against demagnetization while tungsten disulfide regulates the microstructure, saving expensive heavy rare earth. Measured values pending abstract retrieval. Based on the paper: Microstructure Regulation and Coercivity Improvement in the Dy2O3/WS2 Co-doped Nd-Fe-B Sintered Magnets; F. Yang, Q. Qin, S. Lin, H. Sun, Y. Sui, Z. Guo, A.A. Volinsky; Journal of Superconductivity and Novel Magnetism, 2020, Vol. 33(3), pp. 775-781. Hosts Elena and Marcus. AI-generated voices.

Episode 145 of the Professor Alex Volinsky podcast. Titanium in Cu-Co-Si refines the as-cast grains, joins the precipitation, and resists high-temperature softening; hot-compression mapping turns the composition into a manufacturable hot-working recipe. Measured values pending abstract retrieval. Based on the paper: Effect of Ti Addition on Microstructure Evolution and Precipitation in Cu-Co-Si Alloy During Hot Deformation; Y. Geng, X. Li, H. Zhou, Y. Zhang, Y. Jia, B. Tian, Y. Liu, A.A. Volinsky, X. Zhang, K. Song, G. Wang, L. Li, J. Hou; Journal of Alloys and Compounds, 2020, Vol. 821, article 153518. Hosts Elena and Marcus. AI-generated voices.

Episode 144 of the Professor Alex Volinsky podcast. Cerium added to a titanium-modified Cu-Co-Si alloy alters recrystallization kinetics and the precipitation sequence during hot deformation, tracked alongside flow stress and processing maps. Measured values pending abstract retrieval. Based on the paper: Effect of Ce Addition on Microstructure Evolution and Precipitation in Cu-Co-Si-Ti Alloy During Hot Deformation; Y. Geng, Y. Zhang, K. Song, Y. Jia, X. Li, H.R. Stock, H. Zhou, B. Tian, Y. Liu, A.A. Volinsky, X. Zhang, P. Liu, X. Chen; Journal of Alloys and Compounds, 2020, Vol. 842, article 155666. Hosts Elena and Marcus. AI-generated voices.

Episode 143 of the Professor Alex Volinsky podcast. Aging a Cu-Mg-Ce alloy drives magnesium out of solution into fine precipitates, so the matrix conducts like pure copper while particles hold the strength; cerium refines the precipitation. Measured values pending abstract retrieval. Based on the paper: Mechanical and Electrical Properties and Phase Analysis of Aged Cu-Mg-Ce Alloy; J. An, B. Wang, Y. Zhang, B. Tian, A.A. Volinsky, Y. Liu, G. Wang; Journal of Materials Engineering and Performance, 2020, Vol. 29(1), pp. 1-9. Hosts Elena and Marcus. AI-generated voices.

Episode 142 of the Professor Alex Volinsky podcast. An Al2O3-Cu/35W5Cr electrical contact composite asks what graphene oxide adds: grain refinement, boundary pinning, and load transfer on top of tungsten's arc resistance and alumina's dispersion strengthening. Measured values pending abstract retrieval. Based on the paper: Graphene Oxide Effects on the Properties of Al2O3-Cu/35W5Cr Composite; X. Zhang, Y. Zhang, B. Tian, Y. Jia, M. Fu, Y. Liu, K. Song, A.A. Volinsky, X. Yang, H. Sun; Journal of Materials Science & Technology, 2020, Vol. 37, pp. 185-199. Hosts Elena and Marcus. AI-generated voices.

Episode 141 of the Professor Alex Volinsky podcast. Potassium on zinc sites is a candidate route to elusive p-type ZnO, pairing synthesis and optical measurements with density-functional calculations of defect energetics. Measured values pending abstract retrieval. Based on the paper: Experimental and Theoretical Studies of KxZn1-xO; Z. Ma, F. Ren, Y. Deng, A.A. Volinsky; Ceramics International, 2020, Vol. 46, pp. 763-767. Hosts Elena and Marcus. AI-generated voices.

Episode 140 of the Professor Alex Volinsky podcast. Copper-graphite heat-sink composites fail at the weak copper-graphite interface; molybdenum particles form carbide bridges that carry both heat and load across it. Measured values pending abstract retrieval. Based on the paper: Effect of Molybdenum Particles on Thermal and Mechanical Properties of Graphite Flake/Copper Composites; Q. Cui, C. Chen, C. Yu, T. Lu, H. Long, S. Yan, A.A. Volinsky, J. Hao; Carbon, 2020, Vol. 161, pp. 169-180. Hosts Elena and Marcus. AI-generated voices.

Episode 139 of the Professor Alex Volinsky podcast. M30 high-speed tool steel made from economical water-atomized powders and pressureless sintering, reinforced by vanadium nitride that forms in situ: clean interfaces, pinned grain boundaries, fine grains. Measured values pending abstract retrieval. Based on the paper: In-situ VN Reinforced Powder Metallurgy M30 Steels Prepared from Water Atomized Powders via Pressureless Sintering; H. Sun, F. Yang, Q. Qin, B. Zhang, A.A. Volinsky, Z. Guo; Powder Metallurgy, 2020, Vol. 63(1), pp. 43-53. Hosts Elena and Marcus. AI-generated voices.

Episode 138 of the Professor Alex Volinsky podcast. Flake vs. spheroidal graphite cast irons compared in turning and drilling tractor brackets: flake iron cuts with higher force but breaks chips cleanly, while nodular iron runs hotter and leaves rougher holes. Based on the paper: Effects of Microstructure, Mechanical and Physical Properties on Machinability of Graphite Cast Irons; J. Ren, F. Ren, F. Li, L. Cui, Y. Xiong, A.A. Volinsky; Metals, 2020, Vol. 10(2), article 285. Hosts Elena and Marcus. AI-generated voices.

Episode 137 of the Professor Alex Volinsky podcast. T91 boiler steel loses creep strength during long high-temperature service as carbides coarsen, fine carbonitrides convert to Z-phase, and Laves phase grows; tracking phases alongside properties feeds remaining-life assessment. Measured values pending abstract retrieval. Based on the paper: Mechanical Properties and Phases Evolution in T91 Steel During Long-term High-temperature Exposure; Y. Li, J. Du, L. Li, K. Gao, X. Pang, A.A. Volinsky; Engineering Failure Analysis, 2020, Vol. 111, article 104451. Hosts Elena and Marcus. AI-generated voices.

Episode 136 of the Professor Alex Volinsky podcast. Trace cerium in a Cu-0.8Mg alloy scavenges impurities, refines grains, and pins boundaries during hot deformation, shifting the alloy's flow behavior and safe-working window. Measured values pending abstract retrieval. Based on the paper: Effects of Trace Ce Addition on Hot Deformation Behavior of the Cu-0.8Mg Alloy; G. Sun, Y. Liu, B. Tian, Y. Zhang, Z. Gu, A.A. Volinsky; Journal of Materials Engineering and Performance, 2020, Vol. 29, pp. 776-786. Hosts Elena and Marcus. AI-generated voices.

Episode 135 of the Professor Alex Volinsky podcast. Oxide-dispersion-strengthened 15-15Ti cladding steel gets its creep and radiation resistance from nanoscale yttria particles; this work asks whether cheaper casting can replace mechanical alloying without coarsening the dispersion. Measured values pending abstract retrieval. Based on the paper: Effects of Yttrium Oxides on the Microstructure and Mechanical Properties of 15-15Ti ODS Alloy Fabricated by Casting; Y. Zhuang, X. Zhang, T. Peng, H. Fan, X. Zhang, Q. Yan, A.A. Volinsky; Materials Characterization, 2020, Vol. 162, article 110228. Hosts Elena and Marcus. AI-generated voices.

Episode 134 of the Professor Alex Volinsky podcast. Adding chromium to a copper alloy reshapes its hot-deformation flow curves and precipitate evolution: Cr-rich particles pin grain boundaries, raise the deformation resistance, and refine the final grain structure. Measured values pending abstract retrieval. Based on the paper: Effects of Cr Addition on the Constitutive Equation and Precipitated Phases of Copper Alloy During Hot Deformation; Y. Ban, Y. Zhang, Y. Jia, B. Tian, A.A. Volinsky, X. Zhang, Q. Zhang, Y. Geng, Y. Liu, X. Li; Materials & Design, 2020, Vol. 191, article 108613. Hosts Elena and Marcus. AI-generated voices.

Episode 133 of the Professor Alex Volinsky podcast. Hot deformation maps the safe forging window for a Cu-1.0Co-0.65Si-0.1Ti alloy: cobalt-silicide precipitates strengthen, titanium refines grains, and processing maps separate clean recrystallization from cracking. Measured values pending abstract retrieval. Based on the paper: Microstructure Evolution of Cu-1.0Co-0.65Si-0.1Ti Alloy During Hot Deformation; Y. Geng, X. Li, Y. Zhang, Y. Jia, H. Zhou, B. Tian, Y. Liu, A.A. Volinsky, X. Zhang, K. Song, P. Liu, X. Chen; Vacuum, 2020, Vol. 177, article 109376. Hosts Elena and Marcus. AI-generated voices.

Episode 132 of the Professor Alex Volinsky podcast. Detonating picric acid mixed with MoS2 powder peels the layers into graphene-like nanosheets: a 1:1 mix gives clean hexagonal sheets, while richer mixes overcook the product into Mo2S3. Based on the paper: Detonation Exfoliated Mechanism of Graphene-Like MoS2 Prepared by the Intercalation-Detonation Method and Promising Exfoliation for 2D Materials; F. Yang, K. Wang, P. Hu, X. Wang, T. Chang, Z. Chen, J. Deng, P. Feng, A.A. Volinsky; Applied Surface Science, 2020, Vol. 525, article 145867. Hosts Elena and Marcus. AI-generated voices.

Episode 131 of the Professor Alex Volinsky podcast. Aged Cu-Mg-Fe-Sn-P-Y wire for high-speed-rail catenary reaches 599 MPa tensile strength with 71.1% IACS conductivity: nanoscale iron particles and Mg3P2 precipitates strengthen while the cleaned copper matrix conducts. Based on the paper: Nanoscale Precipitates Evolution and Strengthening Mechanism of the Aged Cu-Mg-Fe-Sn-P-Y Electrical Contact Wire; B. Wang, Y. Zhang, B. Tian, Y. Jia, A.A. Volinsky, V. Yakubov, Y. Liu, K. Song, M. Fu; Journal of Materials Research and Technology, 2020, Vol. 9(3), pp. 6352-6359. Hosts Elena and Marcus. AI-generated voices.

Episode 130 of the Professor Alex Volinsky podcast. Graphene oxide steers antimony tungstate into nanosheets that store lithium largely by fast pseudocapacitive surface reactions: 1141 mAh per gram at low rate, 595 mAh per gram after 130 cycles. Based on the paper: Graphene Induced Growth of Sb2WO6 Nanosheets for High-Performance Pseudocapacitive Lithium-Ion Storage; F. Wang, Y. Liu, H. Wei, G. Wang, F. Ren, X. Liu, M. Chen, A.A. Volinsky, S. Wei, Y.-B. He; Journal of Alloys and Compounds, 2020, Vol. 839, article 155614. Hosts Elena and Marcus. AI-generated voices.

Episode 129 of the Professor Alex Volinsky podcast. Exposed sewage lines and weak plumbing ventilation let sewer gases into Chinese residential and commercial buildings; the paper gives examples, short-term fixes for travelers, long-term fixes for residents, and calls for building-code enforcement. Based on the paper: Why China Stinks. Deficiencies in Plumbing and Ventilation Systems in China; A.A. Volinsky; International Journal of Civil Engineering and Technology, 2020, Vol. 11(7), pp. 16-20. Hosts Elena and Marcus. AI-generated voices.

Episode 128 of the Professor Alex Volinsky podcast. Nickel-doped ZnO nanorod films keep their wurtzite structure while doping shifts the band gap, quenches luminescence, and tunes electrochemical behavior; first-principles calculations trace the changes to Ni-on-Zn impurity levels. Based on the paper: Structural, Electrochemical and Optical Properties of Ni Doped ZnO: Experimental and Theoretical Investigation; Z.-H. Ma, F. Ren, Y.-F. Deng, A.A. Volinsky; Optik, 2020, Vol. 219, article 165204. Hosts Elena and Marcus. AI-generated voices.

Episode 127 of the Professor Alex Volinsky podcast. Built from the authors' abstract: Gleeble hot compression at 500–900 °C and strain rates 0.001–10 s⁻¹, with and without cerium. Cerium refined grains from 80 to 48 micrometers and precipitates from 73 to 27 nanometers, and delayed dynamic recrystallization. Based on the paper: Microstructure Evolution in the Cu-Ni-Co-Si-Cr Alloy During Hot Compression by Ce Addition; Y. Ban, Y. Zhang, Y. Jia, B. Tian, K. Song, X. Li, Y. Liu, A.A. Volinsky, X. Zhang; Materials, 2020, Vol. 13(14), article 3186. Hosts Elena and Marcus. AI-generated voices.

Episode 126 of the Professor Alex Volinsky podcast. Conventional foil strain gauges top out at a few percent strain and fatigue under cycling. Printed conductive inks on elastic polymer films stretch with the host into the tens-of-percent, repeated-loading regime of soft robotics and wearable sensors. No gauge factors are claimed from this paper. Based on the paper: Strain Gauges Capable of Measuring Large Cyclical Deformations Printed on Elastic Polymer Films; A.P. Kondratov, V. Yakubov, A.A. Volinsky; Measurement, 2020, Vol. 166, article 108107. Hosts Elena and Marcus. AI-generated voices.

Episode 125 of the Professor Alex Volinsky podcast. A review, not an experiment — and with no DOI or abstract on record, the episode surveys what such a review covers. The central tradeoff: strength versus conductivity, resolved by precipitation hardening that cleans the matrix while particles block dislocations. Alloy families from Cu-Ni-Si to Cu-Ti. Based on the paper: A Review of Microstructure and Texture Evolution with Nanoscale Precipitates for Copper Alloys; K. Song, Y. Zhang, Y. Jia, B. Tian, Y. Liu, A.A. Volinsky; Journal of Materials Research and Technology, 2020, Vol. 9(5), pp. 11918-11934. Hosts Elena and Marcus. AI-generated voices.

Episode 124 of the Professor Alex Volinsky podcast. In lost foam casting, a polystyrene pattern vaporizes as molten metal advances to take its place — near-net-shape parts with no parting lines, but filling is the critical step. The metal front couples fluid flow with heat transfer and foam decomposition; trapped vapors mean cold shuts and gas porosity. Based on the paper: Simulations and Experiments of Mold Filling in Lost Foam Casting; F.J. Li, H. Zhao, F.Z. Ren, S.B. Song, X.H. Shao, A.A. Volinsky; International Journal of Cast Metals Research, 2020, Vol. 33(4-5), pp. 194-200. Hosts Elena and Marcus. AI-generated voices.

Episode 123 of the Professor Alex Volinsky podcast. Hot deformation is how this precipitation-hardened copper alloy gets forged and rolled, and EBSD reads the result grain by grain: texture, grain boundary character, recrystallized versus deformed regions. Precipitate pinning of boundaries sets the hot-working window. Specific findings await abstract retrieval. Based on the paper: EBSD Analysis of Hot Deformation Behavior of Cu-Ni-Co-Si-Cr Alloy; Y. Ban, Y. Zhang, B. Tian, X. Zhang, Y. Jia, X. Lie, Y. Geng, Y. Liu, A.A. Volinsky; Materials Characterization, 2020, Vol. 169, article 110656. Hosts Elena and Marcus. AI-generated voices.

Episode 122 of the Professor Alex Volinsky podcast. Silicon nitride is superb — hard, strong, thermal-shock resistant — but brittle and hard to join: thermal mismatch tears joints apart on cooling, and molten fillers refuse to wet ceramics. This paper screens interfacial-metal candidates computationally with density functional theory. Based on the paper: Selection of Interfacial Metals for Si3N4 Ceramics by the Density Functional Theory; X. Pang, B. Yang, S. Yang, H. Ren, H. Yang, K. Gao, A.A. Volinsky; Chemical Physics Letters, 2020, Vol. 763, article 138189. Hosts Elena and Marcus. AI-generated voices.

Episode 121 of the Professor Alex Volinsky podcast. Neutral descriptive framing: this paper proposes allergy desensitization based on dynamized allergens. Mainstream immunotherapy uses real, escalating allergen doses with strong trial evidence; dynamization means serial dilution past the point where any allergen molecules remain. Without the text, the episode describes a method, nothing more. Based on the paper: Allergy Desensitization Based on Allergens Dynamization Method; A.A. Volinsky; International Journal of Homoeopathic Sciences, 2020, Vol. 4(4), pp. 198-201. Hosts Elena and Marcus. AI-generated voices.

Episode 120 of the Professor Alex Volinsky podcast. Built from the authors' abstract: a vinyl chloride/vinyl acetate copolymer film with shape memory was probed by limited solvent diffusion into its surface layer. Rapid cooling under stress localizes elastic energy in that surface skin — destroying it eliminates the thermally stimulated shrinkage effect. Based on the paper: Macrostructure of Anisotropic Shape Memory Polymer Films Studied by Molecular Probe Method; Alexander P. Kondratov, Egor P. Cherkasov, Vladislav Paley, Alex A. Volinsky; Journal of Applied Polymer Science, 2021, Vol. 138(15), article 50176. Hosts Elena and Marcus. AI-generated voices.

Episode 119 of the Professor Alex Volinsky podcast. Neutral descriptive framing: one herpes simplex case treated with homeopathic and isopathic preparations — isopathy using a preparation derived from the disease agent itself. Mainstream care is antivirals; outbreaks also resolve on their own. Major reviews found no reliable evidence homeopathy is effective for any condition. Based on the paper: A Clinical Case of Homeopathic and Isopathic Treatment of Human Herpes Simplex Virus; A.A. Volinsky; International Journal of Homoeopathic Sciences, 2021, Vol. 5(1), pp. 146-148. Hosts Elena and Marcus. AI-generated voices.

Episode 118 of the Professor Alex Volinsky podcast. Neutral descriptive framing: a single-patient case report (n=1) of chronic tonsillitis treated with homeopathy plus autonosodes — preparations made from the patient's own diseased tissue, then serially diluted. Homeopathy's efficacy is not established in mainstream clinical evidence. Based on the paper: A Clinical Case of Chronic Tonsillitis Treatment Using Homeopathy and Autonosodes; A.A. Volinsky; International Journal of Homoeopathic Sciences, 2021, Vol. 5(1), pp. 152-154. Hosts Elena and Marcus. AI-generated voices.

Episode 117 of the Professor Alex Volinsky podcast. Fe-based amorphous alloys are soft magnetic materials — no grains, no crystal anisotropy, so domain walls glide freely — but the glass forms only if the melt outruns crystallization. Gas-water combined atomization marries rapid quenching with usable particle shapes; chromium adds corrosion resistance. Based on the paper: FeSiBCrC Amorphous Magnetic Powder Fabricated by Gas-Water Combined Atomization; T. Zhao, C. Chen, X. Wu, C. Zhang, A.A. Volinsky, J. Hao; Journal of Alloys and Compounds, 2021, Vol. 857, 157991. Hosts Elena and Marcus. AI-generated voices.

Episode 116 of the Professor Alex Volinsky podcast. TZM is molybdenum alloyed with titanium and zirconium for service where steels give up — but refractory metals coarsen at temperature and embrittle when impurities segregate to grain boundaries. Lanthanum doping answers with fine particles that exert Zener drag, so fine grains survive the heat. Based on the paper: Secondary Phases Effects on Microstructure and Mechanical Properties of Lanthanum-Doped Titanium-Zirconium-Molybdenum Alloy; Bo-liang Hu, Kuai-she Wang, Ping Hu, Hai-rui Xing, Shi-Lei Li, Song-wei Ge, Jia-yu Han, Xing-jiang Hua, Jing-bo Fu, Alex A. Volinsky; International Journal of Refractory Metals and Hard Materials, 2021, Vol. 95, 105439. Hosts Elena and Marcus. AI-generated voices.

Episode 115 of the Professor Alex Volinsky podcast. Potassium is abundant and its redox potential runs close to lithium's — but the K+ ion is substantially bigger, so each cycle strains the host more. Metal coordination materials (MOFs, Prussian blue analogues) offer open frameworks of cages and tunnels. No capacities or voltages are invented. Based on the paper: Recent Advances and Perspective on Metal Coordination Materials-based Electrode Materials for Potassium-ion Batteries: A Review; Fei Wang, Yong Liu, Hui-Jie Wei, Teng-Fei Li, Xun-Hui Xiong, Shi-Zhong Wei, Feng-Zhang Ren, Alex A. Volinsky; Rare Metals, 2021, Vol. 40(2), pp. 448-470. Hosts Elena and Marcus. AI-generated voices.

Episode 114 of the Professor Alex Volinsky podcast. A review, not an experiment — and the abstract is not retrievable, so this episode surveys the territory such a review covers. Damage sequence: cracks initiate at coating defects, channel across the coating, then deflect along the interface (delamination) or penetrate the substrate. Based on the paper: Review of the Fatigue Behavior of Hard Coating-Ductile Substrate Systems; Yan-yun Bai, Jin Gao, Tao Guo, Ke-wei Gao, Alex A. Volinsky, Xiao-lu Pang; International Journal of Minerals, Metallurgy and Materials, 2021, Vol. 28(1), pp. 46-55. Hosts Elena and Marcus. AI-generated voices.

Episode 113 of the Professor Alex Volinsky podcast. Every deposited SiC film carries residual stress, and Stoney's 1909 equation reads it as one number for the whole wafer — but real deposition is non-uniform, and the stress concentrations that crack films hide near the wafer edge. Nonparametric estimation lets the data decide the stress field's shape. Based on the paper: Nonparametric Estimation of SiC Film Residual Stress from the Wafer Surface Profile; O. Savchuk, A.A. Volinsky; Measurement, 2021, Vol. 177, 109238. Hosts Elena and Marcus. AI-generated voices.

Episode 112 of the Professor Alex Volinsky podcast. Neutral descriptive framing: a single clinical case report (n=1), discussed in English from the bibliographic record since no abstract or full text is retrievable. Herpes simplex establishes lifelong latency; conventional care uses antivirals. Homeopathy's efficacy is not established in mainstream clinical evidence. Based on the paper: A Clinical Case of Homeopathic and Isopathic Treatment of Herpes Simplex Virus Manifestations; A.A. Volinsky; Homeopathy and Herbal Medicine, 2021, Vol. 2(58), pp. 27-29. Hosts Elena and Marcus. AI-generated voices.

Episode 111 of the Professor Alex Volinsky podcast. Copper and iron barely dissolve in each other, yet Cu-Fe alloys promise copper's conductivity with iron's strength and magnetism. Powder metallurgy forces the powders together, then rolling stretches the microstructure into aligned iron fibers. Measured values await abstract retrieval. Based on the paper: Microstructure and Properties of Cu-Fe Alloys Fabricated via Powder Metallurgy and Rolling; C. Zhang, C. Chen, L. Huang, T. Lu, P. Li, W. Wang, F. Yang, A.A. Volinsky, Z. Guo; Powder Metallurgy, 2021, Vol. 64(4), pp. 308-320. Hosts Elena and Marcus. AI-generated voices.

Episode 110 of the Professor Alex Volinsky podcast. Alternating amorphous NiP with crystalline Ni raised uniform elongation from 24% to 43% and yield strength from 108 to 172 MPa. Piled-up dislocations build back stress and strain hardening, while multilayer interfaces arrest cracks. Based on the paper: Deformation Mechanisms of NiP/Ni Composite Coatings on Ductile Substrates; Z. Zhang, H. Xu, X.Y. Zhou, T. Guo, X. Pang, A.A. Volinsky; Coatings, 2021, Vol. 11, pp. 1-12. Hosts Elena and Marcus. AI-generated voices.

Episode 109 of the Professor Alex Volinsky podcast. Aluminum carries the world's power lines, but pure aluminum softens when heated and hot conductors sag. The route here is powder metallurgy, and the key variable is oxygen: Al2O3 skins on powder particles hurt consolidation and conductivity. Measured numbers await abstract retrieval. Based on the paper: Thermally Stable Al Conductor Prepared from Al Powder with a Low Oxygen Content; C. Chen, F. Li, W. Han, T. Lu, P. Li, Q. Cui, Y. Sui, Z. Guo, A.A. Volinsky; Materials Science and Engineering A, 2021, Vol. 813, 141174. Hosts Elena and Marcus. AI-generated voices.

Episode 108 of the Professor Alex Volinsky podcast. BCN sits in the B-C-N triangle with diamond and cubic BN: short covalent bonds, low mass, hard and thermally strong. RF-sputtered films with varied H2/N2 flows gave hardness 6–22 GPa and modulus 125–140 GPa, with photoluminescence peak shifts. Based on the paper: Nanoindentation and Photoluminescence Studies of Hydrogenated Boron Carbon Nitride Thin Films; S.D. Nehate, A.K. Saikumar, M. Fincan, A. Santana, A.A. Volinsky, A. Campiglia, K.B. Sundaram; ECS Journal of Solid State Science and Technology, 2021, Vol. 10, 057004. Hosts Elena and Marcus. AI-generated voices.

Episode 107 of the Professor Alex Volinsky podcast. Same dream as the Cu-Co-Si-Ti paper, different chemistry: the Cu-Ni-Si Corson family upgraded with cobalt and chromium. Co gives finer, more stable silicides; Cr adds its own precipitates and pins grain boundaries. Specifics await abstract retrieval. Based on the paper: Properties and Precipitates of the High Strength and Electrical Conductivity Cu-Ni-Co-Si-Cr Alloy; Y. Ban, Y. Geng, J. Hou, Y. Zhang, M. Zhou, Y. Jia, B. Tian, Y. Liu, X. Li, A.A. Volinsky; Journal of Materials Science & Technology, 2021, Vol. 93, pp. 1-6. Hosts Elena and Marcus. AI-generated voices.

Episode 106 of the Professor Alex Volinsky podcast. Write with solvent, store in the polymer's memory, reveal with shape recovery. Local plasticization patterns a PVC film with invisible ink, and the shape memory effect stores and reproduces the information — demoed as hidden marking of shrink labels. Based on the paper: Recording, Storage, and Reproduction of Information on Polyvinyl Chloride Films Using Shape Memory Effects; A.P. Kondratov, E.P. Cherkasov, V. Paley, A.A. Volinsky; Polymers, 2021, Vol. 13(11), pp. 1-13. Hosts Elena and Marcus. AI-generated voices.

Episode 105 of the Professor Alex Volinsky podcast. Anatase TiO2 is a classic photocatalyst, but its 3.2 eV band gap drinks only UV light. Bismuth's filled 6s orbitals shrink the effective gap so absorption shifts toward visible light. No measured band gaps are claimed. Based on the paper: Theoretical and Experimental Studies on Electronic Structure and Optical Properties of Bi-doped Anatase TiO2; Z. Ma, F. Ren, Z. Yang, A.A. Volinsky; Optik, 2021, Vol. 241 (article 167107). Hosts Elena and Marcus. AI-generated voices.

Episode 104 of the Professor Alex Volinsky podcast. CrN is a workhorse hard coating, and nitrogen flow is the control knob: too little gives Cr metal, more gives Cr2N, more gives stoichiometric cubic CrN, each with its own hardness and stress. No numbers from this paper are claimed. Based on the paper: Nitrogen Effects on Structure, Mechanical and Thermal Fracture Properties of CrN Films; Y. He, K. Gao, H. Yang, X. Pang, A.A. Volinsky; Ceramics International, 2021, Vol. 47(21), pp. 30729-30740. Hosts Elena and Marcus. AI-generated voices.

Episode 103 of the Professor Alex Volinsky podcast. Electrical hardware needs copper's conductivity, but pure copper is soft. The classic answer is precipitation hardening: fine particles block dislocations while the cleaned matrix conducts. The paper's specific findings are not retrievable. Based on the paper: Excellent Mechanical Properties and High Electrical Conductivity of Cu-Co-Si-Ti Alloy due to Multiple Strengthening; Y. Geng, Y. Ban, X. Li, Y. Zhang, Y. Jia, B. Tian, M. Zhou, Y. Liu, A.A. Volinsky, K. Song, S. Tang; Materials Science and Engineering A, 2021, Vol. 821 (article 141639). Hosts Elena and Marcus. AI-generated voices.

Episode 102 of the Professor Alex Volinsky podcast. A neutral two-patient case report: COVID-19 treated with isopathic autonosodes from each patient's own material plus homeopathic remedies; two weeks, no complications, recovery with high IgG. Recovery cannot be attributed to treatment; reviews find no evidence beyond placebo. Based on the paper: Two Cases of Isopathic and Homeopathic Treatment of Coronavirus Disease 2019; A.A. Volinsky, S.V. Gunter; International Journal of Homoeopathic Sciences, 2021, Vol. 5(3), pp. 321-323. Hosts Elena and Marcus. AI-generated voices.

Episode 101 of the Professor Alex Volinsky podcast. Cu-2.6Co-0.65Si on a Gleeble simulator, 500-900 C: 0.2 wt% yttrium promotes dynamically recrystallized grains, softening the metal in hot working. The abstract is partially truncated; no invented findings. Based on the paper: Effect of Y Addition on Microstructure Evolution and Precipitation of Cu-Co-Si Alloy During Hot Deformation; P. Yang, Y. Zhang, M. Zhou, Y. Jia, B. Tian, Y. Liu, X. Lie, A.A. Volinsky; Materials Characterization, 2021, Vol. 181, article 111502. Hosts Elena and Marcus. AI-generated voices.

Episode 100 of the Professor Alex Volinsky podcast. Why Chinese buildings smell: poor venting, dried-out trap seals, misapplied air admittance valves, high-rise stack effects from rapid construction and dry climates. Sewer gas is more than odor: H2S toxic, methane explosive. Paper text not retrievable. Based on the paper: Why China Stinks. Deficiencies in Sewer Systems in China; A.A. Volinsky; 2021, Vol. 10(238), pp. 22-24. Hosts Elena and Marcus. AI-generated voices.

Episode 99 of the Professor Alex Volinsky podcast. Three molybdenum alloys (TiC, La2O3, both) by powder metallurgy: the triple alloy's nanoscale carbides and oxides pin boundaries for about 1291 MPa strength, 6.6% elongation, 368 HV. Figures per the research-page summary. Based on the paper: Secondary Phases Strengthening-Toughening Effects in the Mo-TiC-La2O3 Alloys; B. Hu, J. Han, S. Ge, X. Hua, S. Li, H. Xing, K. Wang, P. Hu, J. Fu, W. Zhang, A.A. Volinsky, E.S. Marchenko; Materials Science and Engineering: A, 2021, Vol. 831, article 142271. Hosts Elena and Marcus. AI-generated voices.

Episode 98 of the Professor Alex Volinsky podcast. Knitted NiTi mesh stretches with tissue-like superelasticity and cyclic softening, yet the effect lives in the knitted architecture, not the wire, whose loops slide and rearrange. Goal: criteria for mesh materials in soft-tissue reconstruction. Based on the paper: Softening Effects in Biological Tissues and NiTi Knitwear During Cyclic Loading; Y.F. Yasenchuk, E.S. Marchenko, S.V. Gunter, G.A. Baigonakova, O.V. Kokorev, A.A. Volinsky, E.B. Topolnitsky; Materials, 2021, Vol. 14. Hosts Elena and Marcus. AI-generated voices.

Episode 97 of the Professor Alex Volinsky podcast. A portable tensile machine for tension and cyclic loading with load-displacement curves, for superelastic biomaterials and NiTi alloys whose hysteresis evolves with fatigue; for classrooms, labs, field. An instrument paper, not a new law. Based on the paper: Portable Universal Tensile Testing Machine for Studying Mechanical Properties of Superelastic Biomaterials; S.V. Gunter, E.S. Marchenko, Y.F. Yasenchuk, G.A. Baigonakova, A.A. Volinsky; Engineering Research Express, 2021, Vol. 3(4), pp. 1-8. Hosts Elena and Marcus. AI-generated voices.

Episode 96 of the Professor Alex Volinsky podcast. A guest-edited volume overview: tiny metal volumes are often far stronger than bulk, as dislocations escape to free surfaces; touring nanoindentation, micropillar compression, in-situ microscopy. No single-experiment findings claimed. Based on the paper: Small Scale Deformation using Advanced Nanoindentation Techniques, Volume II; special issue of Micromachines, 2021, guest-edited by A.A. Volinsky and T.Y. Tsui; Micromachines, 2021. Hosts Elena and Marcus. AI-generated voices.

Episode 95 of the Professor Alex Volinsky podcast. A guest-edited special-issue overview: the stress-corrosion triad, hydrogen embrittlement in high-strength steels, corrosion fatigue in marine service, and the toolbox of slow strain rate testing and pre-cracked specimens. No single-experiment findings claimed. Based on the paper: Corrosion Cracking Behavior of Metals and Alloys; special issue of Metals, 2021, guest-edited by A.A. Volinsky and L. Qiao; Metals, 2021. Hosts Elena and Marcus. AI-generated voices.

Episode 94 of the Professor Alex Volinsky podcast. Neutral framing of a conference item on two COVID-19 cases treated with isopathic and homeopathic preparations: case reports describe individuals, not causes. Reviews find no reliable evidence of homeopathy beyond placebo. Based on the paper: Two Clinical Cases of Isopathic and Homeopathic Treatment of Coronavirus Infection 2019; A.A. Volinsky, S.V. Gunter; conference presentation, 2022, pp. 17-18. Hosts Elena and Marcus. AI-generated voices.

Episode 93 of the Professor Alex Volinsky podcast. 2.5 wt% ZrTiO4 in molybdenum pins grain boundaries and deflects cracks: rolled strength past 1000 MPa, 25% elongation annealed, 166% more than the lightly dosed alloy; too much ceramic turns particles into crack starters. Based on the paper: ZrTiO4 secondary phase effects on ductility and toughness of molybdenum alloys; B. Hu, J. Han, S. Ge, X. Hua, S. Li, H. Xing, K. Wang, P. Hu, J. Fu, W. Zhang, A.A. Volinsky; Materials Letters, 2022, Vol. 307, 131077. Hosts Elena and Marcus. AI-generated voices.

Episode 92 of the Professor Alex Volinsky podcast. SPS-sintered Cu/0.5CeO2/30Cr with 0.5 wt% graphene oxide reaches 64.59% IACS, nearly 13% above the graphene-free alloy, as sintering reduces the oxide toward conductive graphene. Hardness and strength stayed behind the paywall. Based on the paper: Preparation and Properties of Graphene Reinforced Cu/0.5CeO230Cr Electrical Contact Materials; S. Liu, L. Li, M. Zhou, S. Liang, Y. Zhang, J. Huang, B. Tian, Y. Geng, Y. Liu, Y. Jia, X. Li, A.A. Volinsky; Vacuum, 2022, Vol. 195, 110687. Hosts Elena and Marcus. AI-generated voices.

Episode 91 of the Professor Alex Volinsky podcast. Graphene oxide and ceria raise a Cu30Cr10W alloy's activation energy from 186.2 to 247.9 kJ/mol, a 33% higher thermal barrier, so contacts hold shape in an arc. Figures from the author's hosted manuscript text. Based on the paper: Thermal Deformation Behavior of GO/CeO2 Insitu Reinforced Cu30Cr10W Electrical Contact Material; S. Liang, M. Zhou, Y. Zhang, S. Liu, X. Li, B. Tian, Y. Geng, Y. Ban, Y. Jia, Y. Liu, A.A. Volinsky; Journal of Alloys and Compounds, 2022, Vol. 899, 163266. Hosts Elena and Marcus. AI-generated voices.

Episode 90 of the Professor Alex Volinsky podcast. Hot-compression mapping of graphene-reinforced Cu/CeO2/Cr contacts: constitutive equation, grain refinement, safe-window maps; numbers pending abstract retrieval. Based on the paper: Microstructure Evolution of Graphene Reinforced Cu/CeO2/Cr Electrical Contact Materials Under Thermal Deformation Behavior; L. Li, S. Liu, S. Liang, Y. Zhang, M. Zhou, J. Huang, B. Tian, Y. Geng, Y. Ban, Y. Liu, Y. Jia, X. Li, A.A. Volinsky; Journal of Materials Research and Technology, 2022, Vol. 18, pp. 1412-1423. Hosts Elena and Marcus. AI-generated voices.

Episode 89 of the Professor Alex Volinsky podcast. Cu-30Fe by mechanical alloying, pressureless sintering, rolling: iron particles stretch into tadpoles as copper grains refine; annealed at 400 C: 620 MPa, 10% elongation, 50% IACS. Figures per a library summary and a citing paper. Based on the paper: Microstructure and Properties Evolution of Rolled Powder Metallurgy Cu-30Fe Alloy; C. Zhang, C. Chen, P. Li, M. Yan, Q. Qin, F. Yang, W. Wang, Z. Guo, A.A. Volinsky; Journal of Alloys and Compounds, 2022, Vol. 909, 164761. Hosts Elena and Marcus. AI-generated voices.

Episode 88 of the Professor Alex Volinsky podcast. Retained delta ferrite protects 17-4PH steel against hydrogen embrittlement: fast diffusion through ferrite lowers local hydrogen at dangerous traps. Best case (480 C/4 h age, 12 h charge) measured 40.9% susceptibility, the lowest reported. Based on the paper: Ferrite Effects on the Hydrogen Embrittlement of 17-4PH Stainless Steel; Y. Zheng, H. Sun, L. Yan, H. Yang, X. Pang, K. Gao, A.A. Volinsky; Anti-Corrosion Methods and Materials, 2022, Vol. 69(3), pp. 331-338. Hosts Elena and Marcus. AI-generated voices.

Episode 87 of the Professor Alex Volinsky podcast. Powder-metallurgy AA2024 friction-stir-welded at 2000 rpm, 100 mm/min: 415 MPa tensile strength (85% of base metal), 282 MPa yield, 9.5% elongation; stir zone recrystallizes to 2.15-micron grains while the overaged HAZ is weakest. Based on the paper: Microstructure and Mechanical Properties of Powder Metallurgy AA2024 Aluminum Alloy Using Friction Stir Welding; W. Han, P. Li, N. Liu, C. Chen, S. Dong, Z. Guo, F. Yang, A.A. Volinsky; Journal of Central South University, 2022, Vol. 29, pp. 871-882. Hosts Elena and Marcus. AI-generated voices.

Episode 86 of the Professor Alex Volinsky podcast. Fine semicoherent Nb/V/Ti/Mo carbide nanoprecipitates fight hydrogen embrittlement in martensitic steels by trapping hydrogen and refining the matrix; protection scales with precipitate size, number, and distribution. Based on the paper: Review of Metal Carbide Nanoprecipitate Effects on Hydrogen Embrittlement of High Strength Martensitic Steel; Y. Zheng, H. Sun, L. Yan, X. Pang, A.A. Volinsky, K. Gao; Anti-Corrosion Methods and Materials, 2022, Vol. 69, pp. 409-416. Hosts Elena and Marcus. AI-generated voices.

Episode 85 of the Professor Alex Volinsky podcast. Porous nitinol invites bone ingrowth, but pores concentrate stress, so strength limits implants; aluminum alloying strengthens the NiTi matrix, balanced against shape memory and biocompatibility. Magnitudes pending abstract retrieval. Based on the paper: Improved Mechanical Properties of Porous Nitinol by Aluminum Alloying; A.N. Monogenov, E.S. Marchenko, G.A. Baigonakova, Y.F. Yasenchuk, A.A. Volinsky, A.S. Garin; Journal of Alloys and Compounds, 2022, Vol. 918, 165617. Hosts Elena and Marcus. AI-generated voices.

Episode 84 of the Professor Alex Volinsky podcast. A Cu-1Ni-0.9Sn-0.5Ti-0.3Cr alloy mapped under hot compression for its constitutive model and processing map: the safe forging window where recrystallization refines grains instead of cracking. Measured values pending abstract retrieval. Based on the paper: Microstructure and Hot Deformation Behavior of the Cu-1Ni-0.9Sn-0.5Ti-0.3Cr Alloy; S. Tang, M. Zhou, X. Li, Y. Zhang, D. Xu, Z. Zhang, B. Tian, Y. Jia, Y. Liu, A.A. Volinsky, E.S. Marchenko; Materials Today Communications, 2022, Vol. 31, 103771. Hosts Elena and Marcus. AI-generated voices.

Episode 83 of the Professor Alex Volinsky podcast. High-entropy ceramics pack five-plus elements on one sublattice; the composition space is too vast for trial and error, so machine learning guides the search to predicted hardness and stability. The paper's numbers pending abstract retrieval. Based on the paper: Design of Superhard High-entropy Ceramics Coatings via Machine Learning; X. Xu, S. Wu, L. Yan, T. Guo, K. Gao, X. Pang, A.A. Volinsky; Ceramics International, 2022, Vol. 48(21), pp. 32064-32072. Hosts Elena and Marcus. AI-generated voices.